DIY cheap LSx Urethane Motor Mounts ;-)
#1
DIY cheap LSx Urethane Motor Mounts ;-)
I have been using these at $59 per set they are a pretty good deal IMO.
http://liquidironindustries.com/GM-LS-Motor-Mounts.html
http://liquidironindustries.com/GM-LS-Motor-Mounts.html
#4
On The Tree
iTrader: (1)
Join Date: Apr 2009
Location: 201 NJ
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
I'm picking up a pair of those plates from LII next weekend, with an entire Eliminator chassis attached to them
We might use those motor mount plates on my brother's 240sx swap too.
They have got fuel systems down to a science too.
We might use those motor mount plates on my brother's 240sx swap too.
They have got fuel systems down to a science too.
#6
On The Tree
iTrader: (1)
Join Date: Apr 2009
Location: 201 NJ
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
I was going to fab tabs or short pieces of tube from the bushings to the subframe but he's been reading the 240 sites too much and would rather spend more on bolt-in kits vs fabbing the stuff even though we have all the tools.
#7
On The Tree
iTrader: (1)
Join Date: Jul 2005
Location: Portland OR
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Plates 30.80
http://www.ebay.com/itm/LS1-Conversi...-/280970296324
rubber bushings less than 24$
http://www.ebay.com/itm/Anchor-Industries-Motor-Mount-Complete-Rubber-Black-Chevy-Each-2285-/330947061864?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1982%7CModel%3ACorvette&hash=item4d0dfb6868&vxp=mtr
total 54.80-just need 2 bolts and some tabs.
http://www.ebay.com/itm/LS1-Conversi...-/280970296324
rubber bushings less than 24$
http://www.ebay.com/itm/Anchor-Industries-Motor-Mount-Complete-Rubber-Black-Chevy-Each-2285-/330947061864?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1982%7CModel%3ACorvette&hash=item4d0dfb6868&vxp=mtr
total 54.80-just need 2 bolts and some tabs.