CamaroLance

What's the easiest way to hook up a throttle cable to my 67 Camaro using my original gas pedal? Pics are always great!

Indyjc

iTrader: (1)

It's been a few years, I used the 99 Camaro throttle cable with a gas pedal from a 70ish Nova with a 6 cyl. The Nova used a cable. Was a complete bolt in with no mods. Might try the conversions section.

99ssleeper

iTrader: (98)

Heres what I did...built a small bracket, used a Lokar LS1 cable, and modified the stock throttle arm on the firewall.

badazz81z28

iTrader: (6)

Lokar LS1 cable, hooks right to the pedal. I have one on my 78 Camaro

LS1MCSS

iTrader: (18)

Unlike yours, his had mechanical carburetor linkage from the factory. His factory pedal setup is nothing like yours. The post with the pic's looks like the way to go.

bmf5150

Lokar ls1 cable works perfect

thunderstruck507

iTrader: (18)

On my Chevelle I used the Lokar cable. Sleeve runs to the firewall and I heated the pedal arm inside and twisted it to fit the cable. (flat part of pedal arm was parallel to the firewall, twisted it so that it's perpendicular)

Be sure to bend the arm front/back enough you get WOT but it bottoms out on the floor or something else so you don't stretch or break the cable.

CamaroLance

Thanks for responding. The pictures are great...very helpful!

CamaroLance

I like what you did..it looks great but I don't have the clearance the way you did on the Nova on the 67 Camaro.

CamaroLance

What type of gas pedal (from what kind of car) fits with the Lokar cable? I have a 67 Camaro. Anyone have any part numbers for the Lokar cable?

Gus K

did you ever find the right part number ?

G Atsma

Five years later??? Really? Call Lokar.