250z10

first off i want to say thanks to all members of ls1 tech and preformance trucks.net bc over the past 2 years i have read hundereds of post that made this all come together.

so to start off its a 96 chevy s10 ext cab that had a 4.3 5speed.
what im putting in it is a 05 l33 5.3 with 799 cast heads and 04 t56 6speed out of a gto.

i got a little parts happy so i have already got a long way into the project but i wanted you all to know more about it.

i rebuilt the motor and installed a tsp 220r cam and hardened push rods and ls2 timing chain. toped off with lunadi duel gold valve springs.

on top i put a 96mm typhoon intake and 30# injectors with a FAST 92mm tb.

for the trans is a stock build with a spec stage 2 clutch and f body pro 5.0 shifter.

for the rear i went with a ford 8.8 with 373 limited slip and disk brakes.

the rest is tipical s10 swap stuff like lsx swap shorty headers, frame mounts and motor mounts. and a readiator that fits inside the core subort with duel elc. fans.

ill try up loading pics as soon as i can

ZQ8LS1

iTrader: (3)

Good Luck !!

I love my LS swap. Post some pics.

250z10

i will very soon

250z10

here is the start

250z10

and more

250z10

and more

250z10

i dont have a pic but there is a tsp 220r cam with 112lsa in there

250z10

im at a stand still for acc brackets

250z10

had to stop and order corvette brackets. i was going to use truck brackes bc i thought my intake would sit high enough to clear the water pump. but its not so i ordered a corvette ls2, crank pully, water pump and power steering bracket. we will see what this will get me.

250z10

i got my corvette brackets and water pump in. everything fit good. i started plugin up my psi wiring harness. got the motor plugged up. now i need to work on the dash.