88 BMW E30 325is LSX/T56 Turbo Build
06-24-2014, 11:09 AM
#41
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Haha very true, the tail lights will be replaced too they have seen better days. What do you guys think the flap on the wing should say?
08-05-2014, 03:43 PM
#45
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Going to run e28 hubs in e30 trailing arms and move the shock mount.
Haven't made much progress, 745i swapping my e28 so I can still have some fun while I build this car.
09-17-2014, 09:58 AM
#46
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
So it's been a while since I have bought anything for the car.
The 5 series is basically finished, just needs a few little things buttoned up.
Recently bought a 60mm JGS wastegate, S475 1.10 T6, and v bands.
Turbo is supposed to arrive tomorrow, and I will post how I plan to fit it then.
The 5 series is basically finished, just needs a few little things buttoned up.
Recently bought a 60mm JGS wastegate, S475 1.10 T6, and v bands.
Turbo is supposed to arrive tomorrow, and I will post how I plan to fit it then.
10-23-2014, 10:10 AM
#56
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
So I ordered an MGW shifter, Monster clutches Lt-1sc w/ lightweight flywheel and a circuit soul shift ****. So far I've only received the shifter so here's that, very nice piece.
Shaved the valve covers and installed power steering and alternator.
And I'm contemplating cutting up the car instead of sticking cheap fender flares on it like everyone does.
Shaved the valve covers and installed power steering and alternator.
And I'm contemplating cutting up the car instead of sticking cheap fender flares on it like everyone does.
10-28-2014, 06:37 PM
#59
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Clutch and flywheel just showed up from Monster. It's an LT1-SC twin disk, it uses a c7 pressure plate with monster's clutch disks and a lightweight billet flywheel. Rated for 1000whp, that should do the trick.
11-06-2014, 11:13 AM
#60
Staging Lane
Thread Starter
Join Date: Apr 2014
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Fuel cell, dual 044s, fittings, and bunch of other parts all ready to go in. Installed the monster clutch/flywheel the other day and pulled my stock gas tank yesterday. I'm still waiting on a few things to fit the fuel system. Next is injectors and megasquirt.
