boostnut

iTrader: (7)

Wrapping up a swap in a 95 mustang & don't know what to use for a throttle cable. Ideally I would like to find one that fits the firewall (2 bolt mount) correctly and modify the ends as needed.

What are you fox guys using? A cable from a 95 f-150 inline 6 looks like it may work but before I order one I thought I should ask here.

Bowtiedford

iTrader: (9)

on my fox body I used the stock factory one

Bowtiedford

iTrader: (9)

boostnut

iTrader: (7)

Hmmm, my stock cable is nowhere near that long. Gonna try one for a 92/93 F series pickup. Should be here in a couple days.

Ref. ATP Y614

Bowtiedford

iTrader: (9)

I'm surprised it wouldnt be as there both 5.0's and t body was on the same side and location.

boostnut

iTrader: (7)

Got the f-150 cable today, no deal, doesn't work. Going to mod the f- body cable with the mustang firewall fitting like I should have done in the first place.

5.0 LsX

iTrader: (7)

stock fox cable, universal lokar and or lsx universal cable with the oem firewall parts modded, all worked great for me

1bad03snake

iTrader: (16)

I used a factory 5.0 throttle cable I drilled a hole in the casting on my old ls6 intake and tightened the metal table down with a small bolt/nut

boostnut

iTrader: (7)

There must have been a change to the cable for 1995. My stock 5.0 cable is about 4" short.

matt99

iTrader: (4)

The lokar cable is cut to fit and it's not very pricey and looks nice as well.

jwcarguy

iTrader: (76)

X2 on the Lokar cable

sick_46

iTrader: (3)

I just did a swap on my 97 mustang. it had the v6 and that throttle cable looked like it would work perfectly. I am using dbw so I didn't use it but I did take it out after the motor was in just so I could see how it would work if I ever convert to cable

tschellinger2

What length was the universal lokar throttle cable you guys were running for the fox?

FrossB

iTrader: (1)

Lokar knockoff off ebay here. I think it is 40" and cut to fit.

booboo37

iTrader: (43)

what k-member you guys using and any problems ?

blackfire93

Used an S10 cable from the junkyard on my Zephyr. Opened hole in firewall just a tad. Plugged right into the hole and was the perfect length. No modification needed to the cable. Using a truck intake.