Steering Column wiring question
#1
Steering Column wiring question
Using all 4th gen wiring in my 2ng gen, except for the stuff with the steering column (horn, turn signals, hazards). So I need to get this figured out so I actually have some turn signals.. instead of just hand signals lol. The pics below show the connectors from each car, which plug into the steering column. they are similar, but not exactly the same as far as colors go. These column wires aren't listed in the Haynes manuals I have for these cars.
Goal: use the wires that originally ran to the 2001 connector, and run them to the '78 connector, so that hopefully the turn signals will work on the column
Question 1: do you know what each of the wires is for on the 2001 connector (second pic), or on the 78 connector?
Question 2: the plastic coating has fused to the wires, making it pretty much impossible to strip them. Any tricks to working with this issue?
1978 Column
green - horn?
yellow - ?
purple - ?
brown - ?
dark blue - left turn?
light blue - right turn?
black - ground?
pink - power
black - ground?
2001 column
yellow - ?
green- horn
gray - ?
purple - ?
pink - ?
gray - ground?
blue - ?
gray - ground?
pink - power
Goal: use the wires that originally ran to the 2001 connector, and run them to the '78 connector, so that hopefully the turn signals will work on the column
Question 1: do you know what each of the wires is for on the 2001 connector (second pic), or on the 78 connector?
Question 2: the plastic coating has fused to the wires, making it pretty much impossible to strip them. Any tricks to working with this issue?
1978 Column
green - horn?
yellow - ?
purple - ?
brown - ?
dark blue - left turn?
light blue - right turn?
black - ground?
pink - power
black - ground?
2001 column
yellow - ?
green- horn
gray - ?
purple - ?
pink - ?
gray - ground?
blue - ?
gray - ground?
pink - power
Last edited by crimson_bird; 12-01-2014 at 04:39 AM.
#2
TECH Fanatic
iTrader: (23)
I'm not sure about the 4th gen wiring off hand. But, for the 2nd gen, you can find everything you will need in our manual for it.
http://www.painlessperformance.com/Manuals/20114.pdf
Pages 77-79
Hope that helps
http://www.painlessperformance.com/Manuals/20114.pdf
Pages 77-79
Hope that helps
#5
TECH Fanatic
iTrader: (23)
http://www.painlessperformance.com/schematics
#7
I'm not sure about the 4th gen wiring off hand. But, for the 2nd gen, you can find everything you will need in our manual for it.
http://www.painlessperformance.com/Manuals/20114.pdf
Pages 77-79
Hope that helps
http://www.painlessperformance.com/Manuals/20114.pdf
Pages 77-79
Hope that helps