S-10 Exhaust Pictures
12-06-2014, 04:57 PM
#1
Registered User
Thread Starter
Join Date: Dec 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
S-10 Exhaust Pictures Any LS / S-10 owners have good pictures of N/A exhaust route? Have Long Style Stainless Works Headers. Looking to run 3" with an H past rear axle.
12-08-2014, 04:26 PM
#2
It all depends on what crossmember you have, and where your gas tank is. Most guys run exhaust under the crossmember, and then 90 it to the passenger side, then 90 toward the back, put the x or crossover there, and into mufflers. Getting pipes out the back, can be tight, but it can be done. Sorry, I don't have nay pics, mine are shortys anyway (for now)
12-08-2014, 07:14 PM
#4
Registered User
Thread Starter
Join Date: Dec 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
12-09-2014, 07:23 PM
#5
This is mine 2003 ext cab with shorties,no cats,dual pipes back to dual in/out Magnaflow with a built in X pipe then dual out behind the rear tire. I then had flex pipe installed to allow the system to flex a little a stop the headers from leaking at the collectors all the time.
12-10-2014, 12:01 PM
#7
I am absolutely interested in this! I have a regular cab that I will be installing the Stainless Works 1 7/8" LTs (already have) on, let me know how this turns out! If I had my way, I'd want dual 3" stainless with an X pipe of some sort ran out the passenger side over the axle...
Trending Topics
12-10-2014, 12:21 PM
#8
TECH Fanatic
iTrader: (6)
Join Date: Nov 2010
Location: Arkansas
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
This is mine 2003 ext cab with shorties,no cats,dual pipes back to dual in/out Magnaflow with a built in X pipe then dual out behind the rear tire. I then had flex pipe installed to allow the system to flex a little a stop the headers from leaking at the collectors all the time.