When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry for the late response. Im using the stock truck accessories, they clear everything just fine with the smaller diameter power steering pulley. I honestly have no idea of my u joint angles. Just kind of shoved everything in and measured for a drive shaft and had one made. Iv taken it on the freeway a few times and no weird vibrations or anything like that.
Thanks for responding back. There's valuable reasons to validate your U-joint working angles that go beyond preventing noticeable driveshaft vibrations. Minimalized U-joints angles provide the most efficient transfer of power and also a higher safe maximum RPM ceiling (the higher their angles, the less RPM your joints can safely be turned at). Lastly, since your U-joint angles are directly tied to your engine inclination angle, optimizing/minimizing them also means your transmission pan, or case of a T56, tucks higher up in the car for more ground clearance and protection.