ls 5.3 cam question
#1
Staging Lane
Thread Starter
Join Date: May 2015
Location: St.louis Mo
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
ls 5.3 cam question
I have a 1990 foxbody with a 5.3 .
I have a chance to get this cam for 150$, but I'm wondering if itll work well in a 5.3 with ls6 intake 706 heads shorty sanderson headers (will upgrade soon)
Lobe seperation 112
Duration 230/230
Valve lift 604./603
I have a chance to get this cam for 150$, but I'm wondering if itll work well in a 5.3 with ls6 intake 706 heads shorty sanderson headers (will upgrade soon)
Lobe seperation 112
Duration 230/230
Valve lift 604./603
#4
Staging Lane
Thread Starter
Join Date: May 2015
Location: St.louis Mo
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
thx allot.
I was thinking its a little big, however I had to ask seeing how I don't know how to tell if itll all be top end or a good pull the whole rpm range.
I was thinking its a little big, however I had to ask seeing how I don't know how to tell if itll all be top end or a good pull the whole rpm range.
#5
TECH Apprentice
Cam
That cam is to big for most 5.3 it also depends on Applycation. If it an auto you will need a loose converter.