Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Conversion almost complete 2004 6.0

Thread Tools
 
Search this Thread
 
Old 05-04-2016, 10:44 PM
  #1  
Registered User
Thread Starter
 
Matthew0209's Avatar
 
Join Date: May 2016
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Conversion almost complete 2004 6.0

Engine ran fine for about 2mins then I pressed the gas a little then it backfired from the the drivers side and stopped...now I have to hold the gas petal to keep it running..but as soon as I let the pedal go it backfires and shuts! Its getn fire,and gas on the the drivers side, the headers aren't getn warm on the drivers side! Any help please help thanks
Old 05-04-2016, 11:26 PM
  #2  
TECH Enthusiast
iTrader: (1)
 
33willys's Avatar
 
Join Date: Mar 2014
Location: Alamogordo, NM
Posts: 667
Likes: 0
Received 43 Likes on 32 Posts

Default Ran fine

If the engine has been stored a while you may have clogged injectors. Also check your fuel pressure. Use a noid light to make sure you have fire to the injectors on both banks.
Old 05-06-2016, 10:01 PM
  #3  
11 Second Club
iTrader: (88)
 
the_merv's Avatar
 
Join Date: Mar 2006
Location: The Beach...
Posts: 19,261
Received 63 Likes on 54 Posts

Default

Check wiring



Quick Reply: Conversion almost complete 2004 6.0



All times are GMT -5. The time now is 07:27 AM.