Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

No throttle

Thread Tools
 
Search this Thread
 
Old 05-31-2016, 08:47 AM
  #1  
Teching In
Thread Starter
 
trobert3's Avatar
 
Join Date: Feb 2011
Posts: 13
Received 0 Likes on 0 Posts

Default No throttle

Swap 78 nova has been running over a year , everything from 09 Silverado 5.3 with 6l80. Took car out yesterday Memorial Day running fine get on freeway , then I noticed car wouldn't shift out of 4th gear at this time I have throttle so head home, 5 blocks from home and no throttle but engine still running. Finally make it home, disconnect battery for 10 minutes reattach, throttle responds so I drive around the block goes through all six gears , then no throttle response again so I repeat process with battery but same results after a short drive no throttle.
Old 06-01-2016, 06:51 AM
  #2  
Restricted User
 
JoeNova's Avatar
 
Join Date: Mar 2014
Location: Ohio
Posts: 7,194
Received 104 Likes on 87 Posts
Default

I think I would have converted to drive-by-cable already.

When the throttle stops working, check for codes. You might be losing TAC signal or ground (it was ground in my case).
Old 06-01-2016, 07:05 AM
  #3  
Teching In
Thread Starter
 
trobert3's Avatar
 
Join Date: Feb 2011
Posts: 13
Received 0 Likes on 0 Posts

Default

I pull code po641 open circuit. So am checking the harness and grounds.
Old 06-01-2016, 09:51 PM
  #4  
TECH Resident
 
DW SD's Avatar
 
Join Date: Feb 2014
Location: Encinitas CA
Posts: 952
Received 7 Likes on 6 Posts
Default

http://www.camaro5.com/forums/showthread.php?t=360258
couple threads out there about back feeding sensor voltage.



Quick Reply: No throttle



All times are GMT -5. The time now is 04:57 AM.