Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

LQ9 doesn't like MAF plugged in

Thread Tools
 
Search this Thread
 
Old 09-03-2016, 07:45 AM
  #1  
Teching In
Thread Starter
 
71'bu's Avatar
 
Join Date: Feb 2016
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default LQ9 doesn't like MAF plugged in

I have an 02 LQ9 with an ls6 manifold, ZO6 MAF, 80mm throttle body. The car idles fines but as soon as soon as I try to drive down the road, it starts running like crap. Give it gas and it wants to stall. My Air/fuel ration with start around 12.47 then drop to 10ish when trying to drive. All of this is with the MAF plugged in. If I unplug it, car runs fine. I'm going to check for 12v later at the pink wire on the MAF. I also have the MAP sensor installed, I forget which one. I know it's off a cobalt ss so I can run SD down the road. Thanks for the help guys

Last edited by 71'bu; 09-03-2016 at 07:56 AM. Reason: More info



Quick Reply: LQ9 doesn't like MAF plugged in



All times are GMT -5. The time now is 09:42 PM.