Need help identifying connector 2012 5.3 - OBD2 related
01-01-2017, 03:46 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Dec 2013
Location: Houston, Tx
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Need help identifying connector 2012 5.3 - OBD2 related Been working on putting a 5.3 out of a 2012 Tahoe (LMG) in a 54 Chevy C3100. I retrofit the wiring harness, but somewhere in the move from my last house 3 months ago, I can't find a piece of the wiring harness...
The below connector goes into the cab and I need to wire in the OBD2 port from one wire off of this connector. Not sure which wire it will be...
I used the below manual from GM Upfitter to find the pinout (pg 218), but I cant find this specific connector in the manual. I can see that it says DELPHI, but I dont see a model number for the connector.
https://drive.google.com/file/d/0B93...ew?usp=sharing
Any help with which wire(s) are needed for the OBD2 port would be appreciated.
The below connector goes into the cab and I need to wire in the OBD2 port from one wire off of this connector. Not sure which wire it will be...
I used the below manual from GM Upfitter to find the pinout (pg 218), but I cant find this specific connector in the manual. I can see that it says DELPHI, but I dont see a model number for the connector.
https://drive.google.com/file/d/0B93...ew?usp=sharing
Any help with which wire(s) are needed for the OBD2 port would be appreciated.
