LS3 Mod 49 Chevy Business coup
#163
On The Tree
Thread Starter
#164
On The Tree
Thread Starter
Took these pieces to Missoula to be powder coated--- bumper brackets, spindles ect--- one week later they called and their ready to be picked up.
Driver side header and ex installed-- A/C alum dress up cover.
Parts to be powder coated.
Driver side header and ex installed-- A/C alum dress up cover.
Parts to be powder coated.
#167
On The Tree
Thread Starter
Calipers epoxied
powder coated parts
I hope to have this running this spring-summer. Some more pix got the pieces that came back from the Powder coater, came out nice. Waiting for some fastners from Fastnal, there in the middle of moving---- won't be open till Friday.
The following users liked this post:
kpeters59 (03-25-2020)
#169
On The Tree
Thread Starter
#170
On The Tree
Thread Starter
Haven't worked on this for a bit-- had lens implant surgery ----- this has been GREAT-- cant wait to do some welding, hoping I'll be able to see the puddle. Can't lift anything over 10# for a few weeks, will only take an hour or so to finish fitting up rotors, brakes,rolling chassis will be complete. Paint process should start at the end of Feb.
#172
On The Tree
Thread Starter
#178
On The Tree
Thread Starter
Car is on the frame, doors and trunk fitted all seam were attended to looks great, can hardly wait for this to be in color
All the openings are painted-- color sanded and buffed
All the openings are painted-- color sanded and buffed
The following users liked this post:
transam5.7lt1 (09-19-2019)