91 notchback ls1/60e swap
#61
new update.i have made about 6passes total and only two were decent on the 60'.other 4 passes completely blew the tires off on initial take off.
so 1 of these 4 are my problems as i should hook easy since im probly making 320hp at the wheels and its a stock stall.
1.car is to lite in the ***
2.drag radials are old and hard
3.struts are worn and not letting car transfer weight
4.i have no idea what im doing
i opted for #3 and bought new struts.after i removed my old struts i compressed them and they basically have no rebound.these are definitely going to make a difference.
so 1 of these 4 are my problems as i should hook easy since im probly making 320hp at the wheels and its a stock stall.
1.car is to lite in the ***
2.drag radials are old and hard
3.struts are worn and not letting car transfer weight
4.i have no idea what im doing
i opted for #3 and bought new struts.after i removed my old struts i compressed them and they basically have no rebound.these are definitely going to make a difference.
#63
TECH Senior Member
#66
got my 1st goal done of going 11s with stock motor.keep in mind still has stock tune,stock torque convertor,stock 4l60e,stock manifolda and stock 2011 5.0 hpipe.basically stock build on a fox.still having trouble hooking up and it would have went higher mph but it shifted into o.d stock shift points and short tire 25.6"
#67
TECH Senior Member
All good! Now you have a solid baseline to build on! Keep it up!