Originally Posted by rpturbo
(Post 20042807)
I'll be interested to see you get twins on this. I have thought about selling my single and doing twins just because I think packaging might be easier. I want to keep my a/c and inner fenders, and then it starts getting tight. I think I will have to ditch the factory ac and do a vintage air unit. |
my friend has a single kit for sale right now from his s10. its nice all stainless stuff, all fits under the hood |
https://cimg0.ibsrv.net/gimg/ls1tech...9074a6a8a.jpeg Got my turbos in today and also got my 8.8 welded up. Just waiting on the machine shop to get finished done with my block now |
The issue I have seen with rear mounting, is getting the charge pipe, or in your case, charge pipes up to the front without either going on the outside of the frame rail or in the way of the front tires. Nothing wrong with it on the outside of the frame rail, its just personal preference. Those turbos look nice. |
Originally Posted by rpturbo
(Post 20047944)
The issue I have seen with rear mounting, is getting the charge pipe, or in your case, charge pipes up to the front without either going on the outside of the frame rail or in the way of the front tires. Nothing wrong with it on the outside of the frame rail, its just personal preference. Those turbos look nice. |
Surely it wouldn’t as they make intercoolers with duel inlet single outlets |
anyone have any experience with the aeromotive a1000 pumps? looking to run it external on e85. would like to be able to support 1000hp |
finally got the 5.3 back from the machine shop. waiting on main and rod bearings to arrive and camshaft. decidded to go with a ljms stage 1 twin turbo cam |
Got the short block assembled yesterday. Went with king racing main and rod bearings. Also started cleaning on the chassis some. Waiting on cam, oil pump, and lifters now. Anyone have any suggestions on drilling the stock gas tank for feed lines or going fuel cell? https://cimg3.ibsrv.net/gimg/ls1tech...0bad75300.jpeg https://cimg0.ibsrv.net/gimg/ls1tech...2564803d7.jpeg https://cimg2.ibsrv.net/gimg/ls1tech...28f69c4d3.jpeg |
All times are GMT -5. The time now is 09:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands