front sump oil pan
04-03-2006, 03:33 PM
#1
Teching In
Thread Starter
Join Date: Mar 2006
Location: central California
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
front sump oil pan I believe I need a front sump oil pan for the LQ4 6.0L I'm planning on putting into the '68 Lincoln I'm working on. The Lincoln is a rear crossmember with the steering drag link behind it. the 462 that came out had a big ol' front sump pan on it.
now, where do I get a front sump pan, pickup tube and dipstick/tube?
the lowest price I've found is I've heard turnkeyenginesupply sells pan+pickup tubes for $250. waiting for an email back from them.
jon
now, where do I get a front sump pan, pickup tube and dipstick/tube?
the lowest price I've found is I've heard turnkeyenginesupply sells pan+pickup tubes for $250. waiting for an email back from them.
jon
04-03-2006, 03:56 PM
#2
TECH Resident
Join Date: Dec 2004
Location: Baltimore, MD.
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
From the LS1 FAQ, the parts you need are the GTO front sump pan:
GTO (Holden) Oil Pan: 12561541 --> REPLACED BY 12581209
GTO (Holden) Oil Pump Pickup: 12572654
GTO (Holden) Windage Tray: 12558189 (shared with C5)
GTO (Holden) Dipstick: 12562468 (shared with C5)
GTO (Holden) Dipstick Tube: 12561544
Obviously, you should find a picture / diagram of that pan and be reasonably certain it'll fit in your application.
Checking my favorite source (PartsZoneOnline), these parts total about $250 new.
You could search around some, if you're not in a big hurry. Might be able to locate a good used setup for less than $250.....Check on here (the classified section).
'JustDreamin'
GTO (Holden) Oil Pan: 12561541 --> REPLACED BY 12581209
GTO (Holden) Oil Pump Pickup: 12572654
GTO (Holden) Windage Tray: 12558189 (shared with C5)
GTO (Holden) Dipstick: 12562468 (shared with C5)
GTO (Holden) Dipstick Tube: 12561544
Obviously, you should find a picture / diagram of that pan and be reasonably certain it'll fit in your application.
Checking my favorite source (PartsZoneOnline), these parts total about $250 new.
You could search around some, if you're not in a big hurry. Might be able to locate a good used setup for less than $250.....Check on here (the classified section).
'JustDreamin'
04-03-2006, 04:55 PM
#4
TECH Enthusiast
iTrader: (17)
Join Date: Sep 2005
Location: Detroit, MI - Camp Pendleton, CA
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Nickens Racing has pans for 150 a peice. Comes with windage tray and pickup. I bought one from them and had it here in 4 days. 963-756-1131 ask for Karina, its usuallythe lady who answers the phone. She'll try to sell you a bunch of other stuff too like LS1 heads so just ask lol.
-Alex
-Alex
have everything u need 
04-04-2006, 12:04 AM
#7
Teching In
Thread Starter
Join Date: Mar 2006
Location: central California
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
you guys are SOOOOO helpful! thanks for the replies. what's with the big brace in the rear? I don't think the angles that come off of there will clear the steering drag link, I'll have to go measure tomorrow.
Alex, do you have a picture of the pan from Nickens Racing?
Alex, do you have a picture of the pan from Nickens Racing?
Trending Topics
04-04-2006, 08:59 AM
#8
TECH Senior Member
iTrader: (7)
Originally Posted by imagreasemonkey
you guys are SOOOOO helpful! thanks for the replies. what's with the big brace in the rear? I don't think the angles that come off of there will clear the steering drag link, I'll have to go measure tomorrow.
Alex, do you have a picture of the pan from Nickens Racing?
Alex, do you have a picture of the pan from Nickens Racing?
Andrew
04-19-2006, 08:46 PM
#11
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dynosmith
I have an 04 GTO pan, tray and tube I will sell for $100 if you are interested.
Ted
04-19-2006, 10:27 PM
#12
No problem, glad everything made it fine! Keep us posted on your progress...
Originally Posted by Ted J
Hey there, thanks for posting this up. I got the oil pan today and everything shipped just fine. Thanks again!
Ted
Ted
08-19-2016, 10:20 PM
#13
Teching In
Join Date: Aug 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to bring this up again but I have a 72 ford ltd I'm doing an lq4 swap on. I will need a front sump pan as well. Did the pan you use clear the steering? Dose anyone have a full set up for sell used less than 250?
Thank you.
Thank you.
