NEEDED: 2006-07 GTO Gauge Cluster wiring pinout?
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: ARIZONA
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
NEEDED: 2006-07 GTO Gauge Cluster wiring pinout?
Just like it says if anyone can help I would really appreciate it. I need the wiring pinouts for the plug that goes into the back of the GTO gauge cluster. I have the plug and I have the cluster..... Just need to know how to marry them to my harness which already has the leads pulled and labeled.
Thanks in advance for any help!
Dave
Thanks in advance for any help!
Dave
#2
Connector Part Information
• 9123-8265-30
• 32-Way Female (GY)
Pin
Wire Color
Circuit No.
Function
1
OG/YE
1340
Battery Positive Voltage
2
BN/WH
32
Instrument Panel Lamps Fuse Supply Voltage
3
--
--
Not Used
4
BN/WH
419
MIL Control
5
L-GN/BK
592
DRL Relay Control
6
GN/WH
1061
UART Serial Data (Secondary)
7-8
--
--
Not Used
9
OG
192
Fog Lamps Switch Signal
10
--
--
Not Used
11
BU
1315
Right Front Turn Signal Lamp Supply Voltage
12
BU/YE
1969
Headlamp/High Beam Relay Control
13
L-BU
1314
Left Front Turn Signal Lamp Supply Voltage
14
L-BU
264
Security Indicator Lamp Supply Voltage
15
OG
238
Seat Belt Switch - Left
16
--
--
Not Used
17
BK/YE
251
Ground
18
BN
897
DIC Switch Low Reference
19
--
--
Not Used
20
PK/BU
539
Battery Positive Voltage
21-25
--
--
Not Used
26
PU/WH
5197
Cruise Control I/P Speed Signal
27
BN/RD
121
Engine Speed Signal
28
BU/BK
894
DIC Toggle Switch Signal
29
--
--
Not Used
30
BN/OG
33
Brake Warning Indicator Control
31
BN/WH
4
Accessory Voltage
32
GY/WH
746
Right Front Door Ajar Switch Signal
#5
heres the pinouts for a 2004:
Connector Part Information
• 9123-8265-30
• 32-Way Female (BK)
Pin
Wire Color
Circuit No.
Function
1
OG/BK
1340
Battery Positive Voltage
2
BN/WH
32
Instrument Panel Lamps Fuse Supply Voltage
3
GN
875
ABS Indicator Control
4
BN/WH
419
MIL Control
5
L-GN/BK
592
DRL Relay Control
6
GN/WH
1061
UART Serial Data (Secondary)
7-8
--
--
Not Used
9
OG
192
Fog Lamps Switch Signal
10
--
--
Not Used
11
BU
1315
Right Front Turn Signal Lamp Supply Voltage
12
BU/YE
1969
Headlamp/High Beam Relay Control
13
L-BU
1314
Left Front Turn Signal Lamp Supply Voltage
14
L-BU
264
Security Indicator Lamp Supply Voltage
15
OG
238
Seat Belt Switch - Left
16
--
--
Not Used
17
BK/YE
251
Ground
18
--
--
Not Used
19
BN
897
DIC Switch Low Reference
20
OG/YE
1340
Battery Positive Voltage
21
GY
85
Cruise Control Engaged Signal
22
WH
396
Cruise Control Engaged Signal
23
--
--
Not Used
24
YE/RD
832
Traction Control Active Signal
25
BN
25
Charge Indicator Control
26
PU/WH
5197
Cruise Control I/P Speed Signal
27
BN/RD
121
Engine Speed Signal
28
BU/BK
894
DIC Toggle Switch Signal
29
--
--
Not Used
30
BN/OG
33
Brake Warning Indicator Control
31
BN/WH
4
Accessory Voltage
32
GY/WH
746
Right Front Door Ajar Switch Signal
Connector Part Information
• 9123-8265-30
• 32-Way Female (BK)
Pin
Wire Color
Circuit No.
Function
1
OG/BK
1340
Battery Positive Voltage
2
BN/WH
32
Instrument Panel Lamps Fuse Supply Voltage
3
GN
875
ABS Indicator Control
4
BN/WH
419
MIL Control
5
L-GN/BK
592
DRL Relay Control
6
GN/WH
1061
UART Serial Data (Secondary)
7-8
--
--
Not Used
9
OG
192
Fog Lamps Switch Signal
10
--
--
Not Used
11
BU
1315
Right Front Turn Signal Lamp Supply Voltage
12
BU/YE
1969
Headlamp/High Beam Relay Control
13
L-BU
1314
Left Front Turn Signal Lamp Supply Voltage
14
L-BU
264
Security Indicator Lamp Supply Voltage
15
OG
238
Seat Belt Switch - Left
16
--
--
Not Used
17
BK/YE
251
Ground
18
--
--
Not Used
19
BN
897
DIC Switch Low Reference
20
OG/YE
1340
Battery Positive Voltage
21
GY
85
Cruise Control Engaged Signal
22
WH
396
Cruise Control Engaged Signal
23
--
--
Not Used
24
YE/RD
832
Traction Control Active Signal
25
BN
25
Charge Indicator Control
26
PU/WH
5197
Cruise Control I/P Speed Signal
27
BN/RD
121
Engine Speed Signal
28
BU/BK
894
DIC Toggle Switch Signal
29
--
--
Not Used
30
BN/OG
33
Brake Warning Indicator Control
31
BN/WH
4
Accessory Voltage
32
GY/WH
746
Right Front Door Ajar Switch Signal
Trending Topics
#11
#13
On The Tree
iTrader: (4)
Join Date: Mar 2007
Location: San Antonio, TX
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
The guy I bought it from says it came off of an '04 Automatic. I plan on using it with an LS1/4l60e combination, but now I am kinda worried. Hopefully it gets a signal telling it whether it is a 6 speed or an automatic. Thanks Art...
#14
Staging Lane
iTrader: (7)
Join Date: Apr 2010
Location: Jefferson City, MO
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Did anybody by chance get their gto cluster wired up and working? I picked up one cheap and was thinking about trying to use it in my swap project but if it wont work its not a big deal. I was told it was from an 04. Here are the part numbers I see on the back.
9218611
BT 021354-M
8400-25173
S/W Ver: 1.0.9
I did a search for the harness part number listed above but didnt find anything. I wonder if you can still purchase the harness peice or if you have to get a used one cut off a salvage car. Thanks in advance for any info.
9218611
BT 021354-M
8400-25173
S/W Ver: 1.0.9
I did a search for the harness part number listed above but didnt find anything. I wonder if you can still purchase the harness peice or if you have to get a used one cut off a salvage car. Thanks in advance for any info.
#15
TECH Enthusiast
iTrader: (52)
Join Date: Oct 2005
Location: SGV, So Cal
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
i bought a gto dash to fit into my 87 iroc. ive been researching but havent done it just yet due to lack of time. since im using the 02 ls1 im looking into the 04 gto mn12 cluster and pigtail.
does anyone know if the Driver information center module is needed to get the primary gauges working. i know that the DIC is mostly to get the LCD digital readings: avg mpg, digital speedometer reading, water temp, voltage etc
IIRC serial data gives out the signal for tach, temp and fuel etc. the vss for speed mph
years back i ran into a 64 nova engine build online. i don't recall him using a dic module.
anyone pull up the dic schematics? i might look into this later with the proper software
if you dont run the dic can you still get a digital mph reading . or just the gauges with needles?
does anyone know if the Driver information center module is needed to get the primary gauges working. i know that the DIC is mostly to get the LCD digital readings: avg mpg, digital speedometer reading, water temp, voltage etc
IIRC serial data gives out the signal for tach, temp and fuel etc. the vss for speed mph
years back i ran into a 64 nova engine build online. i don't recall him using a dic module.
anyone pull up the dic schematics? i might look into this later with the proper software
if you dont run the dic can you still get a digital mph reading . or just the gauges with needles?
Last edited by TPI TERROR; 10-06-2011 at 11:12 AM.
#16
The cluster will show basic functions without the DIC switch....
Ken
Ken
#17
Did anybody by chance get their gto cluster wired up and working? I picked up one cheap and was thinking about trying to use it in my swap project but if it wont work its not a big deal. I was told it was from an 04. Here are the part numbers I see on the back.
9218611
BT 021354-M
8400-25173
S/W Ver: 1.0.9
I did a search for the harness part number listed above but didnt find anything. I wonder if you can still purchase the harness peice or if you have to get a used one cut off a salvage car. Thanks in advance for any info.
9218611
BT 021354-M
8400-25173
S/W Ver: 1.0.9
I did a search for the harness part number listed above but didnt find anything. I wonder if you can still purchase the harness peice or if you have to get a used one cut off a salvage car. Thanks in advance for any info.
Heres a link to my build where we have the cluster working as per factory except for an ABS fault.........2005-06 cluster.......
https://ls1tech.com/forums/conversio...2-install.html
Ken
#18
TECH Apprentice
iTrader: (10)
Join Date: Aug 2008
Location: Winnipeg, Manitoba
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Any chance you have the numbers of which control units you used?
Edit: I found this picture in your thread but cant read it...
What does "PIM" stand for? is it in the photo above?
Anybody know what the resistance values are for the factory sender?
Hope you don't mind but i posted that schematic here so people don't have to search through 26 or so pages...
Edit: I found this picture in your thread but cant read it...
What does "PIM" stand for? is it in the photo above?
Anybody know what the resistance values are for the factory sender?
Hope you don't mind but i posted that schematic here so people don't have to search through 26 or so pages...
Last edited by TTLS1GP; 10-07-2011 at 02:49 PM.
#19
2006 GTO BCM........Body Control Module
PIM.........Parttrain Interface Module
PIM.........Parttrain Interface Module