DIY LS1 wiring harness
09-10-2015, 02:25 PM
#1
Registered User
Thread Starter
Join Date: Sep 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
DIY LS1 wiring harness Hello,
I'm Currently in the process of transferring a 2000 ChevroletCorvette C5, motor which is the 5.7L LS1 engine (with drive by wire throttle)into a custom 41 ******* coupe, with original dash. Im from New Zealand andlocally there isn't many places for me to go. I'm needing help with the wiring,I'm wanting to do it myself, because I've done the rest of the work on the car myself. Would anyone be able to provide me with informationabout the harness wiring, using the existing LS1 loom harness, which I havealready. Diagrams and layouts for transferring the engine wiring into the newbody with what I would need to do for the wiring, any help would be much appreciated.
Cheers
I'm Currently in the process of transferring a 2000 ChevroletCorvette C5, motor which is the 5.7L LS1 engine (with drive by wire throttle)into a custom 41 ******* coupe, with original dash. Im from New Zealand andlocally there isn't many places for me to go. I'm needing help with the wiring,I'm wanting to do it myself, because I've done the rest of the work on the car myself. Would anyone be able to provide me with informationabout the harness wiring, using the existing LS1 loom harness, which I havealready. Diagrams and layouts for transferring the engine wiring into the newbody with what I would need to do for the wiring, any help would be much appreciated.
Cheers
09-10-2015, 05:47 PM
#2
I saw one on LS2.COM a while back that was very helpful. See if I can locate link. somewhere in here I think.
http://www.ls2.com/forums/showthread...al-Information
http://www.ls2.com/forums/showthread...al-Information
09-10-2015, 06:36 PM
#3
Welcome to LS1tech!
I'll stick you here in our conversions section. You'll get all the help you don't yet know you'll need.
https://ls1tech.com/forums/generatio...g-threads.html
I'll stick you here in our conversions section. You'll get all the help you don't yet know you'll need.
https://ls1tech.com/forums/generatio...g-threads.html
