Swapping a 6 speed into 70 chevelle
09-09-2008, 06:17 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: May 2007
Location: CT/NY
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Swapping a 6 speed into 70 chevelle hey guys, im pickin up a 6 speed from a 95 lt1 to swap into my 70chevelle sb, what do i need to do the whole conversion, what pedals do i use, where do i get the right shifter handle and crossmember? any advice would be great, i looked on a few chevelle sites but didnt find much
09-09-2008, 09:36 PM
#2
Launching!
iTrader: (4)
Join Date: Oct 2006
Location: Toronto
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
What engine is in the Chevelle??
Basically, if your car is Automatic right now....here is a link, that should give you an idea of what you are going to need (albeit the link shows a 5 speed tremec, it might point you in the right direction)...
http://www.keislerauto.com/index.php...-500-auto.html
Also to look at bellhousings, look at Quick Time Performance...
http://www.quicktimeinc.com/products.html#chevy
Basically, if your car is Automatic right now....here is a link, that should give you an idea of what you are going to need (albeit the link shows a 5 speed tremec, it might point you in the right direction)...
http://www.keislerauto.com/index.php...-500-auto.html
Also to look at bellhousings, look at Quick Time Performance...
http://www.quicktimeinc.com/products.html#chevy
09-10-2008, 05:32 PM
#4
TECH Fanatic
iTrader: (1)
Join Date: Dec 2004
Location: SW Iowa
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
Also keep in mind that you will have to cut the top of the trans tunnel. The T56 is too tall to fit otherwise. Most people usually have to raise it about 2 inches.
