turbo LQ4 4L80E mustang build
#1
turbo LQ4 4L80E mustang build
I decided to change directions with my car. The car is a 1995 Mustang GT 5 speed. I pulled the 408w I had in it and sold it. I scored a 2002 LQ4 and 4L80E tranny with harenesses for $750. I bought a QA1 4.6 k-member with a-arms for $180, 60mm jgs wastegate and 56mm BOV $625 for both, borg warner s475 turbo $550, pro products intake with rails $225. I think thats a good start for now. I still have parts to sell from my old combo. I'm gonna do a stock rebuild on the motor with a big cam and flipped manifolds running on e85.
Last edited by feldz82; 04-21-2009 at 08:47 AM.
#5
Teching In
Join Date: Dec 2007
Location: San Marcos/ The Woodlands, Tx
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
subscribed so i can haz updates..
the more specific details... the more i'm gonna want to do this...
wiring harness?
will the stock gauges still work?
header options?
ODBII ability?
if you cant answer some of these its all good... i'm just looking to do something else other than keep this h/c 2v gt..
the more specific details... the more i'm gonna want to do this...
wiring harness?
will the stock gauges still work?
header options?
ODBII ability?
if you cant answer some of these its all good... i'm just looking to do something else other than keep this h/c 2v gt..
#6
I thought i would update this thread. since my last post I've got a few things accomplished. I've repinned my factory truck harness. I was gonna run my megasquirt I had laying around, but my buddy talked me into running the stock pcm, so thats the route i'm going.
I've got the turbo mocked up
I had some millwrights at my work make me up some exhaust manifold flanges.
I finished up the crossover pipe on friday
I've got the turbo mocked up
I had some millwrights at my work make me up some exhaust manifold flanges.
I finished up the crossover pipe on friday
Trending Topics
#11
TECH Apprentice
iTrader: (15)
Join Date: Nov 2008
Location: Waukesha, WI
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
subscribed so i can haz updates..
the more specific details... the more i'm gonna want to do this...
wiring harness?
Modify the one that comes with the motor. Very easy, just time consuming. Lots of threads on this.
will the stock gauges still work?
You can get them to work, I went with all Autometer though.
header options?
Kooks makes swap headers $$$ though. Take 351W headers, cut off the flanges and weld on LS1 flanges. Do a search.
ODBII ability?
Wire in an OBDII plug in under the dash. Power wire, 2 grounds, and serial data wire from the PCM, very simple.
if you cant answer some of these its all good... i'm just looking to do something else other than keep this h/c 2v gt..
the more specific details... the more i'm gonna want to do this...
wiring harness?
Modify the one that comes with the motor. Very easy, just time consuming. Lots of threads on this.
will the stock gauges still work?
You can get them to work, I went with all Autometer though.
header options?
Kooks makes swap headers $$$ though. Take 351W headers, cut off the flanges and weld on LS1 flanges. Do a search.
ODBII ability?
Wire in an OBDII plug in under the dash. Power wire, 2 grounds, and serial data wire from the PCM, very simple.
if you cant answer some of these its all good... i'm just looking to do something else other than keep this h/c 2v gt..
#15
On The Tree
Join Date: Jun 2008
Location: Covington La
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Did you have any trouble fitting the 4l80e in the tranny tunnle?
I know everyone that does this swaps k members also, are their any issues with using the stock k member and just modifying the mounts?
I know everyone that does this swaps k members also, are their any issues with using the stock k member and just modifying the mounts?
#20
Thought I would update my thread. Got some time recently to work on the car. I welded in some subframe connectors. I welded my trans xmember mounts to the connectors and started the x member which is gonna be some square tubing.
I also started on the downpipe. I was gonna dump it in front of the front pass tire but decided I'm gonna run a single 4" back and Y it off and reuse my tailpipes. I will snap some photos after work and post them up as soon as i can.
I also started on the downpipe. I was gonna dump it in front of the front pass tire but decided I'm gonna run a single 4" back and Y it off and reuse my tailpipes. I will snap some photos after work and post them up as soon as i can.