Remix-REBUILD- Carbed LSX C3
#21
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: central florida
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Heads and accessories are on the motor... now for intake...and headers...
HOPE TO START HER UP NEXT WEEK !!!
.
Oh yeah... need to change out my CARB center section from 680 to 800cfm... I will reuse my bowls, metering blocks and base plate to save cash.
HOPE TO START HER UP NEXT WEEK !!!
.
Oh yeah... need to change out my CARB center section from 680 to 800cfm... I will reuse my bowls, metering blocks and base plate to save cash.
#22
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: central florida
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=v6WvkGWjXkY
Trying to work out some tranny issues in 3rd gear, these runs are only to the top of 2nd gear. But she runs good drove 30+ miles to the track and back with a 3.36 gear and no power adder. And got warned on every pass I made. LOL
Trying to work out some tranny issues in 3rd gear, these runs are only to the top of 2nd gear. But she runs good drove 30+ miles to the track and back with a 3.36 gear and no power adder. And got warned on every pass I made. LOL