6.0 wont do burnout,Torque Management
#21
TECH Fanatic
iTrader: (12)
Join Date: May 2005
Location: Nashville, TN
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
I use HP tuners. there is seperate tables for DBW cars, and you can turn it all off with a tune.
theres a bunch of ETC tables including
ETC TPS max vs rpm vs TQ table,
ETC injector disable table that will cut cylinders
ETC "Power Hop" that will cut power in large tq changes
theres ETC RPM limiter for max RPM too, but your not hitting that. If you do, it wont "bounce" off the rev limit, it will just cut off and pause before resuming.
I'm not sure if disabling the brake switch will do anything, as the PCM still sees the tq transients. i cant remember off the top of my head whether there's an actual brake tq limiter or not.
theres a bunch of ETC tables including
ETC TPS max vs rpm vs TQ table,
ETC injector disable table that will cut cylinders
ETC "Power Hop" that will cut power in large tq changes
theres ETC RPM limiter for max RPM too, but your not hitting that. If you do, it wont "bounce" off the rev limit, it will just cut off and pause before resuming.
I'm not sure if disabling the brake switch will do anything, as the PCM still sees the tq transients. i cant remember off the top of my head whether there's an actual brake tq limiter or not.
#22
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: iowa
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
when I sent it to waitformeperformance for the tune I told them to turn off the torque management but I dont think they did. This car will not even spin form a stop without using the brakes either. I work with a guy that has efi live and I am going to see if he will come over and check to see if it is still turned on. He said he cant program it but he can look at it. He only programs his diesels.
#23
when I sent it to waitformeperformance for the tune I told them to turn off the torque management but I dont think they did. This car will not even spin form a stop without using the brakes either. I work with a guy that has efi live and I am going to see if he will come over and check to see if it is still turned on. He said he cant program it but he can look at it. He only programs his diesels.
#27
Would it be under engine calibrations or transmission calibrations?
#28
here is a screen shot of the programs I can choose from. Im thinking its in torque reduction?? The other pic is the programs in torque reduction.
Last edited by Duramax_lly; 07-31-2012 at 01:27 PM.
#30
#33
TECH Regular
iTrader: (17)
Came across this thread and since I didn't see the full answer posted, I figured I'd post up. Yes, it's old, but relevant and came up as top search result in Google.
Using HP Tuners: Under "System">General>System Options, Under Brake TqMgt, and your platform, it must = zero. If you don't know which is your platform, look it up just above the system options button or make sure they're all set to 0.
This is not under the transmission or engine tabs, not in any torque management tables. You can zero out and turn off everything else, even set injector ETC torque management vs. mode all to 255 and it won't solve it.
Hope this helps someone. I forgot about it and had to call a friend. Drove me crazy until then.
Using HP Tuners: Under "System">General>System Options, Under Brake TqMgt, and your platform, it must = zero. If you don't know which is your platform, look it up just above the system options button or make sure they're all set to 0.
This is not under the transmission or engine tabs, not in any torque management tables. You can zero out and turn off everything else, even set injector ETC torque management vs. mode all to 255 and it won't solve it.
Hope this helps someone. I forgot about it and had to call a friend. Drove me crazy until then.