Wire loom and techflex
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Wire loom and techflex
I have trimmed down a wiring harness to what I need and I'm ready to wrap it up. I know the easiest thing to do is get some wire loom and electrical tape and go to town, but I have feeling that wont last too long. I've had cheap wire loom crumble to pieces in a mildly warm area after a couple years on my DD (stereo).
Another option I've used before for other things is Techflex (the expandable stuff) but I know that would be almost impossible to get around most of the connectors and whatnot.
Also, I know regular electrical tape doesn't do so well with heat. What are you guys using to finish your newly modified wiring harnesses? Thanks.
Another option I've used before for other things is Techflex (the expandable stuff) but I know that would be almost impossible to get around most of the connectors and whatnot.
Also, I know regular electrical tape doesn't do so well with heat. What are you guys using to finish your newly modified wiring harnesses? Thanks.
#2
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2009
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so it looks like Nylon wire loom is what should be used for the most part. I guess the stuff I used before was just a cheap plastic or maybe most of it is just plastic, and nylon is a specialty thing.
#6
TECH Regular
Join Date: Oct 2009
Location: Whitehall,PA
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
What or where did that fuse/relay panel come from? Looks pretty slick.
#7
I used the split braided loom also. You can get it from McMaster Carr or any on line auto supply (jegs and summit). We use the same stuff on the radars we build for military applications, so definitely good stuff.
http://www.mcmaster.com/#sleeving/=8ul3xq
Instead of tape or zip ties I use velcro straps I got in the electrical section of Home Depot. Looks cleaner than zip ties and with split loom getting to the wires is a snap.
http://www.mcmaster.com/#sleeving/=8ul3xq
Instead of tape or zip ties I use velcro straps I got in the electrical section of Home Depot. Looks cleaner than zip ties and with split loom getting to the wires is a snap.
Trending Topics
#10
TECH Addict
iTrader: (22)
What are the advantages to using the non-adhesive "harness tape" - it's PVC, right? Does it last longer or something?
Are there any places where you would not want to use the non-adhesive tape, and just use a high-quality adhesive electrical tape?
Are there any places where you would not want to use the non-adhesive tape, and just use a high-quality adhesive electrical tape?
Harness tape is best in areas with oil/chemical contact as normal electrical tape instantly falls off with any sort of residue contact. OEM uses it all over to keep costs down from buying two types of tape
Ive had good luck with the factory split loom. After 20 years it breaks down and crumbles, but you've got some time on your hands before it gets that far. I just bend the stuff before using. If it cracks, trash, if it bends, use it
#11
Is there any brand name or part number on any of the fuse/relay components?
#13
If you haven't tried working on a harness that used electrical tape, avoid the mess and don't use it. A few good hot days, and the harness becomes a mess. Not on the outside perse, but the inside gets gummed up pretty good and a black residue is left all over the wires.
Im thinking my harness will be left open and just tied every 6-12". I got the idea from a thread talking about aircraft harnesses and how the military handles them. Then again, I want easy maintenance, and not really interested in the display qualities.
The JY is a good source for cheap OEM quality loom. I seem to get some every few trips. Just be sure to the get the newer stuff that isn't dried out and cracked. Ive seen sizes from 1/4" up to 2". Most of the Aftermarket loom I have seen is junk.
Im thinking my harness will be left open and just tied every 6-12". I got the idea from a thread talking about aircraft harnesses and how the military handles them. Then again, I want easy maintenance, and not really interested in the display qualities.
The JY is a good source for cheap OEM quality loom. I seem to get some every few trips. Just be sure to the get the newer stuff that isn't dried out and cracked. Ive seen sizes from 1/4" up to 2". Most of the Aftermarket loom I have seen is junk.
#17
The seam ripper took it out just fine. Just went through this about 2 months ago. I got tired of having the tape break every two inches from where it was dried and cracked. Its tape, and the seam ripper sliced through like butter no matter the thickness. Only took about an hour to remove it from the entire harness. It has been the same with other harness that I have worked on for other cars as well. Heck even SO makes a tool shaped just like a seam ripper for the same purpose!
http://buy1.snapon.com/catalog/item....group_ID=17634