Holley has release some new LS swap parts
#1
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Holley has release some new LS swap parts
Hey guys, Holley has just released a very affordable swap oil pan, I'll see if I can share a pic. The pricing I heard was pretty decent. They have one part number and it's listed for 1955-1987 GM applications which is pretty standard. Looks like it will work in a lot of applications. Also includes the pick-up and other hardware.
They also have several swap motor mount setups available. They have five different motor mount kits, which should cover a lot of applications. Pricing sounded reasonable. They also have a clam-shell type mount like a G-Body might use.
They also have several swap motor mount setups available. They have five different motor mount kits, which should cover a lot of applications. Pricing sounded reasonable. They also have a clam-shell type mount like a G-Body might use.
#5
Already got the JZ Motorworks pan...
Holley's can be found here:
http://www.holley.com/302-1.asp
Dave
Holley's can be found here:
http://www.holley.com/302-1.asp
Dave
Trending Topics
#9
TECH Addict
iTrader: (22)
Brand new Fbody pan from the dealer is $260 with pickup and windage tray. Add a few hours for a welder to mod it for steering linkage clearance means cheapest pan option
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
#10
Some of the aftermarket pans have designs that work better for racing applications. If you need that...the price isn't so bad. I have the mast pan. Not sure I needed it though. In hindsight I would have bought the new f body pan and had it modified. At almost 500 bucks...the mast pan is an expensive piece.
#11
On The Tree
iTrader: (21)
Join Date: Dec 2003
Location: Centre, Alabama," WEISS LAKE "
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Pan ?? $$$ ??
Which Gm dealer has them for $260 ?? To heck with trying to buy a used one in the classified's !!! you have to live by the site to cach a used one for $200,if you find one !! Any info will be apprc'd !! thanks
#15
On The Tree
iTrader: (21)
Join Date: Dec 2003
Location: Centre, Alabama," WEISS LAKE "
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car was set up with F-body the swap pan won't work,,,, has to be f body,, Can't find it on Gmparts direct or Scoggin Dickey ,, Send me link !!! Thanks for your help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#16
TECH Senior Member
iTrader: (127)
I like the Holley pan very similar to a fbody but I've got used to using ctsv and c6 in most swaps and have found all pans with required hardware for way less than 400$. I'm waiting for someone to sell stamped steel pans just like SBC for LSx motors
Yes the stock cast pan in supposed to be structural but IMO I don't think it would make such a big difference in cast iron block builds. Perhaps a cast Pan is necessary in an aluminum block build but not necessarily so with more common iron 4.8/5.3/6.0 blocks
Yes the stock cast pan in supposed to be structural but IMO I don't think it would make such a big difference in cast iron block builds. Perhaps a cast Pan is necessary in an aluminum block build but not necessarily so with more common iron 4.8/5.3/6.0 blocks
#17
TECH Addict
iTrader: (12)
Brand new Fbody pan from the dealer is $260 with pickup and windage tray. Add a few hours for a welder to mod it for steering linkage clearance means cheapest pan option
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
#18
On The Tree
iTrader: (21)
Join Date: Dec 2003
Location: Centre, Alabama," WEISS LAKE "
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Brand new Fbody pan from the dealer is $260 with pickup and windage tray. Add a few hours for a welder to mod it for steering linkage clearance means cheapest pan option
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
Muscle car pan kit fits just about everything that isnt slammed and its under $200
Until aftermarket companies can compete with those, these new kits are going to flounder
Last edited by 69c4x11; 04-16-2011 at 06:48 AM. Reason: found #'s
#20
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
Good stuff, but f-bod pan does not fit certain apps. For the last couple of year the only game in town for a cast pan was another company, and that pan was usually $500 in Summit.