2001 S10 5.3 swap 4 Attachment(s) I just though I would share some pics of my truck for you S10 guys.. I just completed the 5.3 swap and still working out the bugs.. feel free to ask any questions.. ill do my best to answer them... It is a 2001 S10 with a 2002 5.3 with TR224 cam, comp pushrods, comp 918 springs, LS2 timing chain, 4L60E trans with a TCI 4000 stall, narrowed 8.8 rear with 3:73 gear... Attachment 615999 Attachment 616000 Attachment 616001 http://i14.photobucket.com/albums/a3...k/DSC_1333.jpg Attachment 616002 |
not bad.. i wanted to do that to both my s10s hope to do a swap one day... nice job man |
thanks man... ive worked hard on it... |
Very nice. I just finished up my 95 s10 4.8 swap last night. Feels good to drive it again. |
I wish i could drive mine but unfortunately i had to have my tranny rebuilt after the first time out.. my builder is almost finished with it though so it should be back together by next weekend if no bad luck.. |
Yea thats the way it goes though, I had my swap done last week. But when I went out for the first time, i trashed a lifter and destroyed a cam lobe. Got it fixed now though. Put up some videos when you get the new trans installed. |
That's a great lookin dime. I wish mine was that clean. I just finished an LS6/T56 swap on my 97 dime. Please throw up some vids when you get a chance. |
Ill do my best to get some vids for you guys... I dont have tags on it at the moment but I am gonna take it to the track on Sept. 8th if all goes well... I have a video of the first time out to the track when i lost 3rd gear... I also hadnt got my rear end swap done before that day so i ended up just leaving the stock rear under it to make a couple test runs with it... It was open diff so of course i couldnt launch it and i had to pedal it as you can hear in the vid... with a 2.5 (lol) sixty foot and having no 3rd gear i rolled through at 15.34 lol http://youtu.be/_9CsbHcj1qE |
What headers? |
nice, I look foward to seeing what it runs |
Looks sharp. |
Very nice, I'm looking to start my 5.3L lm7 swap in my 98 in a month or so. I'm gonna try to get a cam and a Procharger D1SC on the truck before May of next year. |
Hey Widopn, any plans on going boost in the future? |
Thanks for all the positive feedback guys... I am using Sanderson shorties from Current Performance ... I might possibly look into forced induction some day but right now im just gonna enjoy it for a while... or untill something breaks lol |
2 Attachment(s) here is a couple pics with the grill back in ... http://i14.photobucket.com/albums/a3...s/DSC_1335.jpg Attachment 615853 Attachment 615854 |
My god that thing is clean. Gonna sell it or trade? |
1 Attachment(s) Thanks... its not going anywhere lol.. that thing is a part of my life .. ive owned it since i was 15... here is another engine pic that i forgot i had... Attachment 615852 |
What mounts did you use? |
I used the poly mounts from Current Performance.... |
well here is a vid ... first full quarter mile pass ..found that my posi unit was slipping while doing the burnout and i DEFINATELY need some cal tracs on it. The truck wheel hopped so bad I had to completely let off as you can see in the vid.. i would be happy with it if it wasnt for that but at least now i know what needs worked on... http://youtu.be/OBkzPkhbya8 |
All times are GMT -5. The time now is 09:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands