Gen 2 Viper T56 OR Gt500 Tr6060 unto LS
 

Looking to swap a T56 transmission from a gen2 viper or a TR6060 from a 09 GT500 i have laying around on a LS2.
Obviously the bellhousing wont fit, has anyone mated the pair without having to buy a $580 custom bellhousing (possibly by using a bellhousing from a readily available gm trans?)

You will need a new input shaft as both are different from the LS T56 shaft.

The Viper T56 also uses a different mid plate with a different throw out bearing. This
may cause issues but I am not 100% certain.