clutch recommendation? ?
#1
TECH Fanatic
Thread Starter
clutch recommendation? ?
So I'm collecting parts for the jeep, I have a 4.8 that originally had an auto, and I just got a nv3500 out of a 95 s10, and am looking for a recommendation for a good/reasonably priced clutch to hold upto the weight of the jeep, prob 3300/3500lbs, and ultimate power goal of 5/600 hp=)
Last edited by slocaddy; 09-23-2016 at 02:14 AM.
#4
TECH Fanatic
Thread Starter
#5
TECH Fanatic
Thread Starter
Thanks for reply, I will look into what you have to offer, I kow your clutches are top notch, and with that I figured it wouldn't fit budget.
#6
Great! We'd be happy to answer any questions you might have. You can get into the thousands for high HP twin-disc clutches like our DYAD, but for bolt-ons and moderate power our Dual-Friction is great and very affordable.
Trending Topics
#8
TECH Fanatic
Thread Starter
You wouldn't happen to have a direct link to the clutch for this application?
#10
TECH Senior Member
iTrader: (7)
Andrew
#12
TECH Fanatic
Thread Starter
this is my first manual trans adaption to anything so new at this and any tips info is appreciated
#13
TECH Senior Member
iTrader: (7)
Hmm....I'll have have to look into that, the trans is still in the s10, I've been feverishly working on the caddy, and am just trying to stuff ordered and here for the jeep when it's time comes.
this is my first manual trans adaption to anything so new at this and any tips info is appreciated
this is my first manual trans adaption to anything so new at this and any tips info is appreciated
Andrew
#14
#15
TECH Fanatic
Thread Starter
did end up being 10 spline , but I will report back when I pull it out for conformation.
#17
TECH Fanatic
Thread Starter
This thread might help
https://ls1tech.com/forums/conversio...-ls-motor.html
https://ls1tech.com/forums/conversio...-ls-motor.html
#18
TECH Fanatic
iTrader: (23)
I used the stock one. Car isn't running but I have no reason to think my results will differ from everyone else who recommends it. Kit came with most everything, even pilot bearing.
http://www.partsgeek.com/mcpj12g-che...lutch-kit.html
Plus get money back here - https://www.couponcabin.com/coupons/parts-geek/
https://ls1tech.com/forums/manual-tr...-04-905-a.html
http://www.partsgeek.com/mcpj12g-che...lutch-kit.html
Plus get money back here - https://www.couponcabin.com/coupons/parts-geek/
https://ls1tech.com/forums/manual-tr...-04-905-a.html
#19
TECH Fanatic
Thread Starter
I used the stock one. Car isn't running but I have no reason to think my results will differ from everyone else who recommends it. Kit came with most everything, even pilot bearing.
http://www.partsgeek.com/mcpj12g-che...lutch-kit.html
Plus get money back here - https://www.couponcabin.com/coupons/parts-geek/
https://ls1tech.com/forums/manual-tr...-04-905-a.html
http://www.partsgeek.com/mcpj12g-che...lutch-kit.html
Plus get money back here - https://www.couponcabin.com/coupons/parts-geek/
https://ls1tech.com/forums/manual-tr...-04-905-a.html