LS1 S14 240sx Swap
#181
Launching!
iTrader: (1)
Join Date: Aug 2006
Location: Buford, GA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
great write ups everyone. i was thinking about shelling out the cash to hinson for his kit out of pure laziness but it seems that i should just get a motor/trans and start fabricating instead . seems like there's a lot of room to save some cash going DIY with mounting.
i'm getting ready to undertake this swap on my S13 so hopefully i'll start documenting like yourselves as soon as i find a motor set (anyone got any good sources?).
i'm getting ready to undertake this swap on my S13 so hopefully i'll start documenting like yourselves as soon as i find a motor set (anyone got any good sources?).
#182
On The Tree
iTrader: (1)
Join Date: Jul 2006
Location: Minnesota
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=syndicate]Hey assclown
on a serious note. I highly doubt a good majority of any of you drift or SCCA so it truely doesnt matter anyways. A little over/understeer isnt going to kill anyone.
HAAAAAAAAAAAAA HAAAA!! That is very funny buddy, do you even know who Mike is ???? Do some research before you talk...
Nice car mike a fine example of a LS13..That thing rips..
Ax
on a serious note. I highly doubt a good majority of any of you drift or SCCA so it truely doesnt matter anyways. A little over/understeer isnt going to kill anyone.
HAAAAAAAAAAAAA HAAAA!! That is very funny buddy, do you even know who Mike is ???? Do some research before you talk...
Nice car mike a fine example of a LS13..That thing rips..
Ax
#183
[QUOTE=ranger2339] I was attacking the concept not the person; therefore requiring no research
I typed a huge paragraph before I left for Dallas on friday, yet it didnt post.... In short... I origionaly posted about options, not particularly defending anything more than that the RB would be my personal choice over and SR should you be choosing between the 2. The thread then lost control, and slipped back in with the help of Ted.
I dont know if we can delete thread posts, but Im sure this would be a time if ever! BTW Deftones ******* rock live!! Same with "10 years"
Originally Posted by syndicate
Hey assclown
on a serious note. I highly doubt a good majority of any of you drift or SCCA so it truely doesnt matter anyways. A little over/understeer isnt going to kill anyone.
HAAAAAAAAAAAAA HAAAA!! That is very funny buddy, do you even know who Mike is ???? Do some research before you talk...
Nice car mike a fine example of a LS13..That thing rips..
Ax
on a serious note. I highly doubt a good majority of any of you drift or SCCA so it truely doesnt matter anyways. A little over/understeer isnt going to kill anyone.
HAAAAAAAAAAAAA HAAAA!! That is very funny buddy, do you even know who Mike is ???? Do some research before you talk...
Nice car mike a fine example of a LS13..That thing rips..
Ax
I typed a huge paragraph before I left for Dallas on friday, yet it didnt post.... In short... I origionaly posted about options, not particularly defending anything more than that the RB would be my personal choice over and SR should you be choosing between the 2. The thread then lost control, and slipped back in with the help of Ted.
I dont know if we can delete thread posts, but Im sure this would be a time if ever! BTW Deftones ******* rock live!! Same with "10 years"
#186
TECH Enthusiast
iTrader: (17)
Join Date: Sep 2005
Location: Detroit, MI - Camp Pendleton, CA
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Drama people... Drama... How do you compare a built RB to a STOCK FORM LS1?!?!?!
That RB setup will cost 7k including the swap. My setup was 3,550... That leaves me 3,450. Umm... that leaves me enough to make close to a TORQUE monstrous 500HP. Get your head out of your ***. Do it while you're waiting for that turbo to spool and I'm 10 cars ahead.
That RB setup will cost 7k including the swap. My setup was 3,550... That leaves me 3,450. Umm... that leaves me enough to make close to a TORQUE monstrous 500HP. Get your head out of your ***. Do it while you're waiting for that turbo to spool and I'm 10 cars ahead.
#187
TECH Apprentice
Join Date: Aug 2006
Location: Mobile AL.
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
"My setup was 3,550..."
i'm not tring to start nothing. but...
i thought i read somewhere you had 6k in it? is that car included? $3550 was just the motor, or motor, rad, driveshaft, ( i know you said you had the fuel pump already), headers, etc? just wondering how you got it so low. im doing the same to the s14 ATM.
i'm not tring to start nothing. but...
i thought i read somewhere you had 6k in it? is that car included? $3550 was just the motor, or motor, rad, driveshaft, ( i know you said you had the fuel pump already), headers, etc? just wondering how you got it so low. im doing the same to the s14 ATM.
#189
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mmdb
Question: Is it possible to modify the 240sx steering column to clear the stock headers?
Ted
Last edited by Ted J; 08-16-2006 at 08:17 AM.
#190
TECH Regular
iTrader: (1)
Join Date: Jun 2006
Location: Beaumont TX
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mmdb
Question: Is it possible to modify the 240sx steering column to clear the stock headers?
#191
TECH Regular
iTrader: (1)
Join Date: Jun 2006
Location: Beaumont TX
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Its nice to see Peters doing what he does best. however im still curious to where most of you guys are picking up motorsets from. ive seen prices from to low to beleive or just sound outright shady to those that are ungodly overpriced which had put a real hault on my setup.
#192
TECH Enthusiast
iTrader: (4)
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by datboibrad
anything is possible, but in if your asking has anyone done it or does anyone offer a modded one for situations like this id have to say no.
That's just my $.02 on it though.
#193
TECH Resident
iTrader: (1)
Join Date: Nov 2004
Location: Spring / Sealy, TX
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by datboibrad
Its nice to see Peters doing what he does best. however im still curious to where most of you guys are picking up motorsets from. ive seen prices from to low to beleive or just sound outright shady to those that are ungodly overpriced which had put a real hault on my setup.
huh?
i picked up all my stuff from a junkyard in houston called manuels or something for 3500 for everything with 30k miles on it.
you just gotta call around man.
#196
TECH Regular
iTrader: (1)
Join Date: Jun 2006
Location: Beaumont TX
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ted J
Anything is possible but to do what that person is talking about doing it's going to require a lot of work and custom fabbing of things. The rack itself is in a position that makes it tough for the exhuast (When I was looking into putting another u joint in the steering shaft and moving it over I was running into the fbody manifolds exiting right into the rack and the u joint on top of it) and makes most if not all aftermarket headers not work, you add in the steering shaft and it just makes it tougher to make a custom set up for it and out of the question for most if not all aftermarket headers for the LS1.
That's just my $.02 on it though.
That's just my $.02 on it though.
what about the set of headers that are really short and run log style and dump tward the very back of the motor. i honestly have no idea what model ls1 headers they are but i want to say they are the stock z28 ss or ws6 headers.
#199
Originally Posted by mikespeed95
someone already tried all teh stock stuff.. none of them work.
and in response to the ecu thing, im running a stock ecu with a magnuson reflash for now.
and in response to the ecu thing, im running a stock ecu with a magnuson reflash for now.
#200
TECH Resident
iTrader: (1)
Join Date: Nov 2004
Location: Spring / Sealy, TX
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
well.....i dont really have an answer for that question taht will make you happy. block huggers might work, but honestly there is little to no room to work with between teh steering shaft and the side of the head on the drivers side, and running 4 1.75'' primaries just aint happenin in that space. you can try stuff, but i dont know if theres an alternative to custom right now.
as soon as one is found though please post it up here. i think mustang headers with flanges swapped migth be the best bet, but even so thats not looking too good.
as soon as one is found though please post it up here. i think mustang headers with flanges swapped migth be the best bet, but even so thats not looking too good.