LS190 - Mercedes 190e LS1 swap
The following users liked this post:
NFA Fabrication (04-20-2020)
#25
TECH Fanatic
iTrader: (14)
Join Date: Mar 2007
Location: Phoenix/Tempe, AZ
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
i know a lot of stock cars have one built into the abs/master.. not an adjustable one but itd bias the pressure itself.
I ask because the 4 wheel drum mustang i have now has 4 wheel disc breaks, but i havent decided on a factory disc setup or a wilwood unit to match the master/breaks.
I ask because the 4 wheel drum mustang i have now has 4 wheel disc breaks, but i havent decided on a factory disc setup or a wilwood unit to match the master/breaks.
#30
LS1 and 190E
Similar Ls1 swap in slow progress here. LS1 & T56 to 190E Merc - Preparing the 190E sub-frame with Nissan Skyline diff & axles and hubs.
Hope this Drop box link will work for pictures.
https://www.dropbox.com/sh/vb59q4xuguraygq/ZH9kiJoqKX
Hope this Drop box link will work for pictures.
https://www.dropbox.com/sh/vb59q4xuguraygq/ZH9kiJoqKX
Last edited by htice; 03-23-2014 at 07:04 PM.
#31
Oof, thats a ton of work...stupid benz with the huge steering box right where the exhaust should go. This is what scared me off from doin this to moms W126 chassis. Looks good though, I always likes the 190 in clean white, dark windows and some simple rims. Gonna be a sweet tire smoker
#32
Oof, thats a ton of work...stupid benz with the huge steering box right where the exhaust should go. This is what scared me off from doin this to moms W126 chassis. Looks good though, I always likes the 190 in clean white, dark windows and some simple rims. Gonna be a sweet tire smoker
#34
Using the Nissan short axle (2ea LH) on both site.
That way I do not have to shorten the axle or re-spline, using the Nissan CV and the Nissan wheel hub & splines. Using the Benz wheel bearing and machining the Nissan hubs to fit the Benz bearings. Using complete Benz brake assy. Very easy to fit with the Nissan hubs. Yes Benz with 114.5 x 5 bolt spacing.
See pictures this drop box link.
https://www.dropbox.com/sh/vb59q4xuguraygq/ZH9kiJoqKX
Driveshaft has to be custom built T56 transmission to the R200 diff..
#36
Has anyone finished one of these projects? I really would like to do this conversion, already have the car. But if someone has already done it, it would be great to see the finished product. Also would be nice to learn from any issues they may have had. Great car to start with.
#40
Hello have a 190E with the L67 supercharged V6
Awesome track/race car suprises a lot of people may go the LS way later on.
l
l
Has anyone finished one of these projects? I really would like to do this conversion, already have the car. But if someone has already done it, it would be great to see the finished product. Also would be nice to learn from any issues they may have had. Great car to start with.