5.3 Vortec swap in a Jeep XJ?
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://ls1tech.com/forums/images/icons/icon5.gif)
I would like to swap a newer 5.3 with its tranny and transfer case in a 92 Jeep Cherokee.
Just looking for anyone that has done it, or advice that would help.
I know the LS has been used in a lot of other cars, but this one will need to be smog legal in CA.
Thanks.
Just looking for anyone that has done it, or advice that would help.
I know the LS has been used in a lot of other cars, but this one will need to be smog legal in CA.
Thanks.
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Can't help you with CA regs, but if you can get past CARB, the motor is a fairly common drop-in. I took my first drive in a CJ with an LQ9/4L65e combo yesterday and it's the bomb.
Good luck.
Good luck.
#3
TECH Fanatic
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its been done to an xj before...I think over in saudi arabia. They seem to do most of the odd swaps first. haha. I havent seen any over here done yet.
Its definetly possible. I wanted to do one in my XJ for awhile. You just gotta build motor mounts and a trans crossmember, and it will "fit"...
Ide like to see someone do it tho! Since its not gonna happen for me anytime soon
J.
Its definetly possible. I wanted to do one in my XJ for awhile. You just gotta build motor mounts and a trans crossmember, and it will "fit"...
Ide like to see someone do it tho! Since its not gonna happen for me anytime soon
J.
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice Jeep, funny to see big street tires on it![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
We never really needed more power. We have a 6" TNT long arm lift and 33 12.5 16 with 4.56 locked. We went places we never thought we could go:O
But we got a trailer and the 4.0 just struggles to hard on the hills pulling it.
I want a 6.2 Caddy Vortec with the 6 speed auto. Then go to a 4.88 or 5.12.
My wife is fine with the 4 speed 5.3 and 4.56. (cheaper too)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
We never really needed more power. We have a 6" TNT long arm lift and 33 12.5 16 with 4.56 locked. We went places we never thought we could go:O
But we got a trailer and the 4.0 just struggles to hard on the hills pulling it.
I want a 6.2 Caddy Vortec with the 6 speed auto. Then go to a 4.88 or 5.12.
My wife is fine with the 4 speed 5.3 and 4.56. (cheaper too)