Speartech harness and P0102 DTC code getting thrown!!
Speartech harness and P0102 DTC code getting thrown!! Just like it says guys I got my harness done by speartech and now that i have the conversion done I am checking things out. I cant seem to clear the P0102 MAF low freq trouble code. Everyone talks about a fuse on the car some where if it is stock but did speartech modify it?
The car is in closed loop cause I dont have the front O2 sensor hooked up is that it? The only other DTC's I am getting is the AC which I dont have hooked up yet and the front O2's that I dont have hooked up yet.
Or is my MAF sensor bad? I am just plugging it in with it clamped to the TB but no filter at all. But I havent driven it that way.
Help
Mike
The car is in closed loop cause I dont have the front O2 sensor hooked up is that it? The only other DTC's I am getting is the AC which I dont have hooked up yet and the front O2's that I dont have hooked up yet.
Or is my MAF sensor bad? I am just plugging it in with it clamped to the TB but no filter at all. But I havent driven it that way.
Help
Mike
Re: Speartech harness and P0102 DTC code getting thrown!! John just so you know the connection of the ground wire you sodiered had broken so I reattacted it and all was good
