New best in the Corvette! 10's inside! Well I finally got some clean passes at the track after all my clutch issues have been worked out and got the nitrous on it and tuned(75 shot). This was my first time at a 1/4 mile track with the car and I also ran a new best n/a time as well. best n/a pass: 1.65 7.21@98 11.32@121 (not sure why my mph seemed low after 98 in the 1/8) Best N20 run(first time I have ever sprayed the car off the dyno) 1.56 6.90@102(101.8) 10.72@130(129.9) video of the above pass is below http://videos.streetfire.net/video/a...3700c8b059.htm |
Nice! 10.72@130, man that's movin! :nod: |
Way to go brother !! What kind of tires did you have out back to hook so well ?? |
Originally Posted by allngn_c5
(Post 8629455)
Way to go brother !! What kind of tires did you have out back to hook so well ?? |
What kind of power does your car make NA vs on the bottle? What sea level is your track? Shifting the car at what RPM? Whats your 330fts? Congratulations thats a some stellar passes!!!!!! |
Congrats dude! :thumb: |
Originally Posted by Zturd
(Post 8630522)
What kind of power does your car make NA vs on the bottle? What sea level is your track? Shifting the car at what RPM? Whats your 330fts? Congratulations thats a some stellar passes!!!!!! |
Wow, strong car!! Sounds like she's around 440rwhp/410rwtq range thats impressive. What H/C/I combo do you have??? |
Originally Posted by Zturd
(Post 8630798)
Wow, strong car!! Sounds like she's around 440rwhp/410rwtq range thats impressive. What H/C/I combo do you have??? |
Originally Posted by Shoaf85
(Post 8632514)
The heads are stock 241 castings with some porting, the cam is a G5X3, and the intake is a stock LS6 with ported stock throttle body and Dynatech longtubes to some B&B bullets to finish it off! Pit |
stock tranny w/ 3.90 gear |
Could you post up some pics of your nitrous install? I'm assuming its a wet shot? |
Yeah I will try to get some up tonight if I get a chance and yes it is a wet kit! Pieced together from an old NX Express kit I had laying around. I used nx noids with dynotune fogger and seems to be working great! |
Originally Posted by Shoaf85
(Post 8629736)
26x11.5x17 MT E.T. Streets (non radial) What rims did you use with those ET's? What about up front? Stock front rim/tires? |
Very nice job buddy. :) |
Originally Posted by 02SCVette
(Post 8635725)
Congrats on the great times! :chug: What rims did you use with those ET's? What about up front? Stock front rim/tires? Thanks for all the comments guys! |
Awesome! Car sounds great too! |
nice numbers my frind |
great numbers man |
awesome nice run |
| All times are GMT -5. The time now is 02:31 PM. |
© 2026 MH Sub I, LLC dba Internet Brands