2008 Dragstrip predictions, lets here'em
 

Lets see who plans on running what times/mph at the track. If you like throw in what is going to better the time versus last year with your previous best. Just to pass some time till the weather comes our way.

Me
Prev- 11.02@126.65mph with 1.51 60ft
2008- 10.89@127.0xmph with 1.47 60ft-4.3x 330ft,6.9xx 1/8th at 99mph

Whats gonna help me hopefully.
New ET streets versus old worn out ones
Slightly changed tune bottom only the low end but hey who knows
I'll be able to hotlap due to roll bar,firejacket and harness
2005 C6 trans to be put in soon will help with shifting-same gear ratios though
New plug wires LOL! Shut up it could help...
Raising the car up for better weight transfer hopefully

Hey Z,
where the heck have you been ? Left you a couple messages here and there.

Prev...cal to be 11.2 with 1.48 sixty foot
2008...10.8 @ 128 with a 1.55 sixty

hurt and help:
new McLeod twin disk (no real slip will hurt my sixty foot a little)
new McLeod adjustible master
new 383 stroker with same old heads
a little more cam
new polished TB
ported Fast
new correct skinnies (26" instead of 22")
my Z may finally shift fast after 18 mos of clutch trouble (NO thx to RPS junk)

Pit

Previous 11.32 on motor 10.7 on spray (first time ever on new clutch/3.90 gear)
2008 11.00@124 on motor 10.4's@134 on spray

Additions
Fast intake
Vararam
Skinnies
most importantly more seat time
(may be going 9's very soon though if I trade my car for a T/A, more drag race friendly)

to slow

I hope to run a 9.40 this weekend at steele best so far a 9.75 in the 1/4 but car has improved alot best 1/8 so far this year 6.14 at 115 and oh yeah mines a vert

11.37 on street tires
Hopefully 10.XXs on drag radials...if it ever stops raining on track days here.

11.00@125 on 18" nitto 555r's 1999 FRC

Setup:
PRC 5.3 stage 2.5 heads
Pat G 232/238 .613/.608 111+1 cam xfi lobes
Vengeance ported fast 90
T-Lewis billet 90mm TB
Powerbond UDP
Yella Terra RR's
TSP LT's no cats
custom magnaflow exhaust
ARP 2000 rod bolts, rev safer :)
Vararam with CF bridge
Stage 3 built 3.90 rear both hardened shafts

blah blah other misc stuff

Dang Racerrob333, we wanted your vett ET predictions not your Funny Car times...LOL...fricken 9's ??
Pit

are ya going to the pinks show in gainsville?

I had planned on it all along but then reading the safety rules and talking to guys on line..they are pretty hard nose about a roll bar if you are more than a tenth below 11.5 ..........PLUS.........the machine shop is jerking Tracy around with my heads so I can't even plan on having something to drive. We do have a Silverado I could get in with..runs 12.8 NA...might be fun. I will look back into it this weekend.
Pit

Brand new 2005 Transmission is HERE!!!!!!!!!!! :) Hoping to install within 2weeks and by then the bar,harness, will all be ready for GO!!!
March 22nd or 29th Saturday test and tune I HOPE!!!

11.52@122 on motor. 1.78 60 ft
10.54@135 on spray. 1.60 60 ft

Hoping for 9.50@150.

I have a twin turbo 402 going into the z06 at the momment. It should help a little!

You must be fired up Z..WITH A NEW ROLL BAR TOO ???
Pit

Dang Dave, keep us posted on that bad-boy !!!!!!!!!!!!!!
Pit

I rarely get to the track and have only been once in this car (that was 13.1 with bald tires and stock clutch), but I'm putting this bitch in the 11's or setting it on fire!:judge:

99 FRC

I'd like to go 7.80 or faster at my local 1/8 track with the mods in my sig. and a drag radial..

Current best is 8.32 @ 89.55 with a weak 2.14 60' on street tires (non existent track prep and 2900ish DA).

And, i'd like to get to a track closer to seal evel and knock off some 11's as well.