Zmg00camaross

iTrader: (11)

Damn with a bar on the back and some subframe connectors should see that thing be alot different on the line. hopefully and post videos, be cool to see the differnce

LSxPwrDZ

iTrader: (4)

I will def keep you guys updated. I'm hoping the drag bar will make it launch straight and I'm pretty sure the subframes will help alot also.

1BADAIR

iTrader: (1)

gonna bog worse with the bar.
I was bending the left wheels studs all the time or just blowing the tires off to leaving straight/even and havent hurt a stud yet with the sphon dragbar
LOL the 12 bolt is another story though
9 inch with a wavetrac soon

LSxPwrDZ

iTrader: (4)

I've got a bottle that will prevent that from happening! I also am changing to a 28x11.5 ET Street cause the class I will be racing in requires DOT tires. I've not had any track outings on a ET Street so I don't know if it will hold or not. I do know that these are about a half inch shorter than my 28x10.5 slicks are.

1BADAIR

iTrader: (1)

the ET's should work
i used to run 27/10.50.15 Et streets and 16/11.50-16 et streets.
have went mid 1.4's on them all. just a little less consistent

LSxPwrDZ

iTrader: (4)

A little update for you guy's...

150 shot, added UMI subframes and a UMI Dragbar
http://www.youtube.com/watch?v=VODpz...e_gdata_player

SlickVert

iTrader: (5)

Now that getting it done!
The right comb make it all work.
Awesome 60', when listening to the video and hearing the engine rpm staying up and not falling off to much you can tell that you were getting a great 60 as well 330', launch was spot on.
Nice job
Bob