Questions On Screwing Slicks
06-01-2011, 10:27 AM
#1
Launching!
Thread Starter
Join Date: Oct 2008
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Questions On Screwing Slicks Can slicks can be screwed one side only?
If so, how many?
If both sides must be screwed, how many are recommended per side?
Specs on the car are as follows:
C6 Z06
Approximately 500 RWHP
M&H 26x12x16 Slicks
60's from mid 1.3x to low 1.4x range
TIA
If so, how many?
If both sides must be screwed, how many are recommended per side?
Specs on the car are as follows:
C6 Z06
Approximately 500 RWHP
M&H 26x12x16 Slicks
60's from mid 1.3x to low 1.4x range
TIA
