Almost in the 10's Took my Camaro to the track for the first time and did pretty well I would say.. Just wish I could have got that 10 sec slip lol.. It's a 99 Camaro stock bottom lq4 with stock 243's , 230/236 thunder cam , fast 92/92 , with 4l80 w/ 3600 yank on a 150 shot.. Going to wait for better weather and go back because when we showed up to the track it was 114 degrees lol.. Da was 2600 at the time of the pass |
|
How much does the car weigh? 60ft isn't bad for a ss3600 but I'd try to get it to do a bit better |
I'm not sure on weight but it's a heavy f body lol iron block 6.0 /4l80 full interior and plus me I'm 270 lol |
A small gust of wind in the right direction you would have hit the 10s. :) Nice pass! |
Thanks sir |
what rpm you leaving at? you spraying the whole way? what rear gear? |
Originally Posted by Blackbird-WS6
(Post 17521596)
what rpm you leaving at? you spraying the whole way? what rear gear? |
Just some good weather and you could see those 10sec passes. Planning on spraying more? Plus RPRs strip isnt very well prepped. Lol |
Originally Posted by mobinlow&cln
(Post 17521778)
I'm leaving at 2k and I sprayed off the line and I have 3:73 gears |
Yea I plan on spraying a 200 once I get a stand alone fuel system .. And I'm not sure on the power I've never put it on a dyno |
If u wana go fast get rid of the yank and call Lane at ptc and it will run close to that on motor my bolt on car wenr 1.62 on motor at 3500lb if the tune is good u dont have to work that hard fir a 10 sec ride |
Originally Posted by quick1le
(Post 17561575)
If u wana go fast get rid of the yank and call Lane at ptc and it will run close to that on motor my bolt on car wenr 1.62 on motor at 3500lb if the tune is good u dont have to work that hard fir a 10 sec ride |
Originally Posted by BennyB
(Post 17568660)
my car has done a best of 1.55 with a yank 4k stall... wheel hopping rolling into the throttle on motor. don't downplay yank, they make one hell of a converter. My father's car goes 1.41-1.45 60's all day, NOTHING wrong with Yank converter's....... |
| All times are GMT -5. The time now is 05:35 PM. |
© 2026 MH Sub I, LLC dba Internet Brands