On3 78/76 first couple of passes
#1
On3 78/76 first couple of passes
Didn't even plan on running today, as it was the Ltx shootout. But they ended up doing test and tune after the event was over. I just HAD to see how the car ran with this Chinese turbo. Now, I debated whether or not to mention this, as the risk of being told I'm making excuses but oh well. I discovered as I was done for the day that my cutout was half closed. Anyway, here are the slips.
#5
#7
Nah, temps were cooler than last time I ran. It ran the 136 pass at 18psi, I turned it up....and it slowed down. I'm convinced the cutout closed up after the first pass. Because after that pass, I turned it up....but it slowed down. Track was soso
Trending Topics
#9
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,139
Likes: 0
Received 16 Likes
on
16 Posts
Yeah that guy had almost a solid second on you, but I bet if you could get you 60ft even in the 1.8 range, you might crack a 10.9 possibly. I'm hoping to get in the 1.8's when I hit the track here soon. I'm hoping the 10 will hold that, since that's no that aggressive of a 60ft
#10
Yeah that guy had almost a solid second on you, but I bet if you could get you 60ft even in the 1.8 range, you might crack a 10.9 possibly. I'm hoping to get in the 1.8's when I hit the track here soon. I'm hoping the 10 will hold that, since that's no that aggressive of a 60ft
#11
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,139
Likes: 0
Received 16 Likes
on
16 Posts
I'm curious can you even roll race on those street tires....say like from a 2nd gear roll without spinning?
#12
Actually I run 315 NT05R drag radials, but 2 things I don't do is pull hard launches and avoid wheel hop as much as possible. And so far that's been working out fine knock on wood lol. No my nitrous is all at once, but since I'd never have a chance in hell for traction in 1st gear, I just waite till 2nd before I spray....and even then I usually spin. All of this is probably helping to save the rear though lol
I'm curious can you even roll race on those street tires....say like from a 2nd gear roll without spinning?
I'm curious can you even roll race on those street tires....say like from a 2nd gear roll without spinning?
#13
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,139
Likes: 0
Received 16 Likes
on
16 Posts
It still spins on the street from a second gear roll on, it's not ridiculously bad....probably 30 yards or so. If the road is warm, it USUALLY hooks from a 4th gear roll on. Was wanting to do the roll race event a couple of months ago, but they were doing that on a Friday and I missed it. And yea, that wheel hope is like a nail in the coffin with our 10 bolt lol
#14
I think you are right. I should have went with them the first go around. Maybe next season, the season ends in 2 weeks where I live.
#15
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,139
Likes: 0
Received 16 Likes
on
16 Posts
I've owned a few sets over the years on a few different cars and to me they are basically just a sticky street tire imo.They actually handle like a decent street tire, get decent amount of miles, do decent in the rain, etc...