Fuel Rail Question...

Reply Subscribe

Thread Tools

Search this Thread

Apr 13, 2009 | 01:23 PM

HASTINGSRJ

Thread Starter

11 Second Club

iTrader: (18)

Joined: Feb 2004

Posts: 1,131

Likes: 4

From: Franklin MASS

Fuel Rail Question...

I am running a GMPP carb style intake on my 414 iron block. I am looking for some fuel rails that go with this intake, and my 42# injectors. I have a set of Speed Inc ones, but they dont work. Any sugestions? Thanks

rob

Apr 16, 2009 | 05:31 PM

HASTINGSRJ

Thread Starter

11 Second Club

iTrader: (18)

Joined: Feb 2004

Posts: 1,131

Likes: 4

From: Franklin MASS

anyone????

Apr 17, 2009 | 08:05 AM

Old Geezer

TECH Senior Member

iTrader: (3)

Joined: Jun 2004

Posts: 5,639

Likes: 71

From: GA, USA

Maybe try posting in the fuel injection section??

Apr 17, 2009 | 02:19 PM

Skinny

11 Second Club

iTrader: (11)

Joined: Nov 2002

Posts: 501

Likes: 0

From: Orange Park, FL

I used Nasty Performance rails (similar in design to Speed Inc rails, I think) on my Victor Jr. I did have to modify the rails and make new brackets, though. I made 4 simple L-shaped brackets out of 1/8" alluminum. Two of the mounting points on the intake (one on each side) lined up with the existing mounting holes in the rails. For the other two, I had to drill a new hole in the rail. Then I used 1/4" bolts and nuts to fasten the rails to the brackets.

Apr 17, 2009 | 05:31 PM

V6 Bird

TECH Senior Member

iTrader: (15)

Joined: Nov 2001

Posts: 5,109

Likes: 0

From: Grand Prairie, TX

Quote:

Originally Posted by HASTINGSRJ

You make your own mounts donkey. The speed Inc blocks work for stock intake style only. they may sell another block for the carb style guys though. Making your own mounts is easy.