loosews6

iTrader: (1)

looking for new hood for my ws6 i just got a 4150tb and super victor intake dont think stock ws6 hood will work? looking for bolt on hood...pic please

armyboyatc

iTrader: (29)

My buddy is running the VFN WS9 hood. It's a bolt on hood. He is running a supervic with a 4500tb and a nitrous outlet kit.

Sorry but I have no pics.

00MaroonZ28

iTrader: (3)

He'll have to cut the hood brace in the back with any hood that is bolt-on. I bet you had to cut the cowl. I hate pin-on hoods. They're a PITA. Had one and going back to bolt on even if I do have to cut. If I were you, cut the hood and see if you can get it to fit. Your problem is the Super Victor which is taller than a Victor Jr. Check out VFN's website and see what they have for 4th gen T/A's. I know it's not a ton of stuff. That's why the camaro is nicer for aftermarket hoods. Tons of hoods out there for it but that's because the WS6 hood is already nice so no one ever swaps it out.

Phoenix H.O.

iTrader: (2)

the cowl is mainly what i had to cut. i had my superhawk hood on the car with my super vic and 4500 throttle body. i only had to trim a piece off of the back edge of the hood that was maybe 2 or 3 inches by 6 inches or so. i didn't like how the hood was right on the throttle body though so i changed to the 4 inch sloped vfn.

00MaroonZ28

iTrader: (3)

That hood in your sig pic is awesome. Looks great with the cowl and keeps the WS6 look.

RENE'S RAGE

iTrader: (96)

Any more pics of the VFN 4" sloped hood.
Does the whole hood extend to the windshield or just the scoop.

loosews6

iTrader: (1)

They have one that doesn't go to windshield..some pic of there.I'm going to get ws9 outlaw hood or 4" sloped hood

Dmoney

iTrader: (22)

I was running my stock hood with a Scorpion 4150 with a Super Vic. Ofcource you'll have to cut. The Scorpion 4150 is the shortest 4150 TB there is and I wanted to use a Super Vic. I rolled the dice and it fit. I run a WS9 Outlaw now, but fyi, no other 4150 will fit with the Super Vic with a stock hood............

00MaroonZ28

iTrader: (3)

Damn, I didn't know about the Scorpion 4150. Woulda gone that way to get a bit more clearance.

loosews6

iTrader: (1)

So the ws9 outlaw hood works with some room for air to get to tb, did you have to cut outlaw hood to fit, what air cleaner you Running...

00MaroonZ28

iTrader: (3)

I'm guessing he's running a carb hat like me so you'll have to cut the cowl no matter what. Hood, a pin-on hood will fit without cutting. I know the bolt-on hood, the brace on the bottom will have to be cut for me to get mine fit.

loosews6

iTrader: (1)

Do you have to cut wiper out of passenger side?

Phoenix H.O.

iTrader: (2)

00MaroonZ28

iTrader: (3)

I didn't have to. It was close but I was able to do it without cutting. I'm running an Extreme Velocity carb hat on top of mine. If you're gonna cut, try to go around the wiper or get as close as possible without cutting into it. You'll be ok. We just had to cut more off after it was mounted because the throttle was what we were having clearance issues with and that wasn't a big problem.

RENE'S RAGE

iTrader: (96)

Thanks, do you think the TB gets it's air from the nostrials or the cowl?

loosews6

iTrader: (1)

What do you have the extreme.velocity carb hat piped to stock toair boxbxxxor how u filter
It.

Phoenix H.O.

iTrader: (2)

i didn't do the cleanest job of cutting but it works.

00MaroonZ28

iTrader: (3)

Yep.

RENE'S RAGE

iTrader: (96)

Phoenix H.O.
Where did you mount your IAT Sensor and your MAP Sensor?

Phoenix H.O.

iTrader: (2)

the IAT is tied off to the side behind my driver side headlight with a zip tie and the MAP is in the back of the intake.