What plug wires to use when relocating coils??
#1
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
What plug wires to use when relocating coils??
I'm moving the coils to the cowl panel and I'm not sure what custom set of wires will fit.
I want the MSD super conductor 8.5mm wires, but the boots are for a distributor.
How do you guys make this work??????
I want the MSD super conductor 8.5mm wires, but the boots are for a distributor.
How do you guys make this work??????
#2
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
you have 3 msd options:
MSD makes a universal cut-to-fit LS1 wire set with straight plug ends 32039
I did the LT1 wire set (LT1 opti connector is the same as the LS1 coil), but I needed 90* plug ends for my application (forcing me to use a LT1 wire set) so I used 32139
you can also get the LT1 wires with straight connectors at the coil (with a 90* plug end) 32139.
it all depends on how you want to route the wires...
http://www.msdignition.com/pdf_catal...og_132-147.pdf
MSD makes a universal cut-to-fit LS1 wire set with straight plug ends 32039
I did the LT1 wire set (LT1 opti connector is the same as the LS1 coil), but I needed 90* plug ends for my application (forcing me to use a LT1 wire set) so I used 32139
you can also get the LT1 wires with straight connectors at the coil (with a 90* plug end) 32139.
it all depends on how you want to route the wires...
http://www.msdignition.com/pdf_catal...og_132-147.pdf
#4
TECH Resident
iTrader: (21)
Join Date: Mar 2002
Location: Bedford ,Ohio
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Moroso has a "Ultra 40" LS1 cut to fit set with the right boots. Havent used them yet. You can really use almost any EMI suppressed wire, but you'll have to get a set of LT1 coil boots, taylor makes them.
Last edited by Gimp98TNT; 11-06-2008 at 11:07 PM.
#6
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
The MSD site shows a LS1/LS6 set that is universal with both a 90 degree and OEM style boot. It say's perfect for relocating the coils.
I just looked through my jegs book and they don't list that set. Is it that they just can not list every wire set MSD makes???
I'm putting them on the list and will call to see if they can get them for me.
I just looked through my jegs book and they don't list that set. Is it that they just can not list every wire set MSD makes???
I'm putting them on the list and will call to see if they can get them for me.