9's in an LS1 M6?
#1
9's in an LS1 M6?
Is there alot of people doing it?
This is my goal for next year. it would have been this year but after buying a rear($2240) and the wifes engagement ring ($3500) i gotta wait to get a set of heads.
Right now i'm doing 10.6's at 129 with a cam only, 150 shot, HEAVY *** SS.
I say heavy *** cause i'm fat and i have a stock 6.0 iron block.I think my race weight it around #3575 with lots of stuff taken out.
This is my goal for next year. it would have been this year but after buying a rear($2240) and the wifes engagement ring ($3500) i gotta wait to get a set of heads.
Right now i'm doing 10.6's at 129 with a cam only, 150 shot, HEAVY *** SS.
I say heavy *** cause i'm fat and i have a stock 6.0 iron block.I think my race weight it around #3575 with lots of stuff taken out.
#2
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
well there are 3 ls1's as far as i know tat have touched nines. RomanSS went 9.94 with a raceweight of about 3800+ pounds 2 years ago. so it is doable.
g'luck
g'luck
#3
Originally Posted by SUX2BU
Is there alot of people doing it?
This is my goal for next year. it would have been this year but after buying a rear($2240) and the wifes engagement ring ($3500) i gotta wait to get a set of heads.
Right now i'm doing 10.6's at 129 with a cam only, 150 shot, HEAVY *** SS.
I say heavy *** cause i'm fat and i have a stock 6.0 iron block.I think my race weight it around #3575 with lots of stuff taken out.
This is my goal for next year. it would have been this year but after buying a rear($2240) and the wifes engagement ring ($3500) i gotta wait to get a set of heads.
Right now i'm doing 10.6's at 129 with a cam only, 150 shot, HEAVY *** SS.
I say heavy *** cause i'm fat and i have a stock 6.0 iron block.I think my race weight it around #3575 with lots of stuff taken out.
with the CO2 assisted cooler and some other stuff, it will be in the 8's this year (should be in the 8's) with the 6-speed...made 800 rwhp on 103 octane with room to grow!
I know this isn't exactly what your looking for, the 6-speed F-body's that run in the 9's are few and far between....
#5
TECH Junkie
iTrader: (19)
i'm going to try for it by the end of this year...
3200lb raceweight
ARE 382 all bore
ARE S3 heads
NICE cam
Kook 1 7/8 LT's, True Duals
Spec Stg 3i clutch(hopefully it holds)
Moser 9" w/ 3.90's or 4.10's (still trying to figure that one out, 137 vs 145mph on a 7000rpm limit)
28" slick
and all the little bolt ons for suspension and other stuff.
Hopefully i could get there without having to spray the world at it. Hoping a progressive 200-250 shot could get me there. Not worried about driving it there(as of this second, haha). We will see though. In theory it should do it, but there is alot of reality inbetween should and did. Good luck for you, luckily i'm getting the car parts in BEFORE the engagement ring
Chris
PS- since we are on the topic, anyone think it's possible with what I just stated for my setup?
3200lb raceweight
ARE 382 all bore
ARE S3 heads
NICE cam
Kook 1 7/8 LT's, True Duals
Spec Stg 3i clutch(hopefully it holds)
Moser 9" w/ 3.90's or 4.10's (still trying to figure that one out, 137 vs 145mph on a 7000rpm limit)
28" slick
and all the little bolt ons for suspension and other stuff.
Hopefully i could get there without having to spray the world at it. Hoping a progressive 200-250 shot could get me there. Not worried about driving it there(as of this second, haha). We will see though. In theory it should do it, but there is alot of reality inbetween should and did. Good luck for you, luckily i'm getting the car parts in BEFORE the engagement ring
Chris
PS- since we are on the topic, anyone think it's possible with what I just stated for my setup?
Last edited by z28kid98; 05-24-2004 at 06:00 PM.
#7
I'm going to try to do it with my stock shortblock some nice heads and about 200 shot. And i'm doing this in my DAILY DRIVER!
Hopefully by then i'll haved the race weight down to 3350 or so. i'm running out of stuff to take out and still be comfterable to drive everyday.
Hopefully by then i'll haved the race weight down to 3350 or so. i'm running out of stuff to take out and still be comfterable to drive everyday.
Trending Topics
#8
Suspended Sponsor Account
Join Date: Feb 2004
Location: Pewee Valley, KY
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
we are looking to make 9's with our "smaller" project car. we just ran a 7.39 in the 1/8 first time out with a marginal 60' of 1.7 and kind of high humidity(71%). Car has a stage 2 5.3L heads and largish cam. once we get the small things lined out we feel the car will make 10's NA (stock bottom end) and we hope for 9's on the juice. car is an M6
#14
TECH Fanatic
iTrader: (1)
Join Date: May 2002
Location: Hot Rainy Humid +2000 DA South Florida
Posts: 1,396
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by bspz28
If I am running 10.7's on motor at a 3250 race weight. How much juice would I need to crack into the 9's ???
I do have an auto though.. but I would think you'd be in the same boat.
Lee