Results from SCD 10's N/A
 

Went to SCD tonight here are the results:

1st run: I went 10.950 on a 1.569 60' the mph clock screwed up so I didn't get a mph on that run, but...comparing this run to my best run at HRP last week I was 1 mph faster and .073 quicker at the 1/8 mile mark then at HRP.
My 1/8 mile ET was 7.002 @ 99.11 mph tonight at SCD. So I'm pretty sure that the 10.95 run was @ 125ish mph.
I made this run on the same tuning I had at HRP.
After the first run I got Allan to install the hot tune for the PCM, but alas....I never got a chance to make a run with it. <img src="gr_sad.gif" border="0">

2nd run: (or I should say 2nd attempt)
On the launch I spun the yoke off the carbon fiber driveshaft just like Allan did at Bowling Green in September. Hey no problem, I had my spare Chromoly DS in the truck, so my (pit crew) <img src="gr_images/icons/wink.gif" border="0"> slapped that one on for me and I was ready for attempt #3.


3rd attempt:
Well, thinking all was well, I was ready to best my new best ET, but it wasn't meant to be.
This time the Chromoly DS held up no problem, but my Strange 12-bolt posi unit had other ideals.
Yep, I broke that on the launch as well.
FIDDLE STICKS!!! <img src="gr_stretch.gif" border="0">

I was launching at 6000 rpm tonight.
I removed the passenger seat and the Mufflex exhaust and put the bullet muffler on for tonight.
Raceweight was 3478 lbs.

The conditions tonight were: COLD and about a 15 mph headwind.
45 degrees, 59% humidity, 30.33 Barometer
-1119 DA

So, thanks to my pit crew for helping me out and pushing me back on the trailer. Thanks you guys!

Hmmmmmmmm......let me see here.
Does this make me the first 346 cid N/A M6 LS1 to run 10's???


Gordon

[ February 03, 2002: Message edited by: GTS SS ]</p>

Re: Results from SCD 10's N/A
 

Great job Gordo! I'll put my money on the spider gears in the 12-bolt. <img src="gr_images/icons/wink.gif" border="0"> I've been there and done that, and Jason seems to have done the same thing in his T/A two weeks ago at River City. It's time for a spool! <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> You really have that car flying down the 1/4! I remember when that car was tipping the scales at 3,700# WAY back when. Congrats on the 10-second N/A slip.
BTW, I believe Judson had the 1st stock-cubed M6 LS1 in the 10's. Right after that, he swapped over to the Jerico.

[ February 01, 2002: Message edited by: Trevor D ]</p>

Re: Results from SCD 10's N/A
 

[quote]Originally posted by Trevor D:
<strong>BTW, I believe Judson had the 1st stock-cubed M6 LS1 in the 10's. Right after that, he swapped over to the Jerico.
</strong><hr></blockquote>

Well damn! Ok then I'm the second one to do it then. <img src="gr_stretch.gif" border="0">

Re: Results from SCD 10's N/A
 

Congrats with your new solid roller set up Gordon, and I think you are the first stock cube m6 in the tens. I think the SAM car either had the new tranny or was 375" when it went from low 11s into the tens.

Mickey
98 Black Z28 6M
370" More Performance Ls1
10.98 @ 124.89 ....NA

Re: Results from SCD 10's N/A
 

Mucho congrats, good to see everything coming together for you. I also think Judson was running the M4 when he made his run in the 10s, still a 346 n/a but it was an M4.

J.

Re: Results from SCD 10's N/A
 

[quote]Originally posted by GTS SS:
<strong>FIDDLE STICKS!!!</strong><hr></blockquote>
What the hell kinda talk is that???? Suppose to say "Son-of-a-bitch!!!!!! That Mu^$er Fu&$er, was starting to piss me off!!!!!"
[quote]Originally posted by GTS SS:
<strong>Raceweight was 3478 lbs.</strong><hr></blockquote>
Did you weight that on SCD's Abacus Scale? LOL

Congrats on your new bests. It's about time that gold plated car made it into the 10's. Remember though, you still have to contend with the black TA. I has a slight surprise for ya. HEHEHE

Tim

Re: Results from SCD 10's N/A
 

[quote]Originally posted by Tim98TA:
<strong>
Did you weight that on SCD's Abacus Scale? LOL

Congrats on your new bests. It's about time that gold plated car made it into the 10's. Remember though, you still have to contend with the black TA. I has a slight surprise for ya. HEHEHE

Tim</strong><hr></blockquote>

No Tim I didn't weigh the car on that pos scale at SCD.
I had the same amount of gas in the tank as I did at HRP, and I removed 72 lbs of weight from the car, then just did some simple math and subtracted the 72 lbs from 3550 and presto, 3478 lbs.

Suprise huh? LOL riiiight!
Oh wait, did you get your little stool permantly mounted in your car so nobody would hide it from you anymore and keep you from being able to get in to your car? HEHEHEHEHE

Anyway, thanks for the congrats guys, and I'm double checking to see if Jusdon did indeed go 10's before he converted to the Jerico or not.

Gordon

[ February 02, 2002: Message edited by: GTS SS ]</p>

Re: Results from SCD 10's N/A
 

[quote]Originally posted by GTS SS:
<strong>then just did some simple math.</strong><hr></blockquote>
Math from "The Ville"?

[quote]Originally posted by GTS SS:
<strong>Suprise huh? LOL riiiight!</strong><hr></blockquote>
Bring it,,,, don't sing it!!!!!

Tim

Re: Results from SCD 10's N/A
 

Hey Gordo, Congrats to be the first in the 10's.I hear that beast is running pretty good,also nice mph. ALLBORENOSTROKE <img src="graemlins/gr_hail.gif" border="0" alt="[hail]" />

Re: Results from SCD 10's N/A
 

Gordon Congrats on the new best. Might be time for a spool for your ride. Frank95z

Re: Results from SCD 10's N/A
 

Very nice times Gordo! You guys really got the car moving now. Congrats on hitting the 10s. I'll be over tomorrow to drive the car or whenver you get it fixed. <img src="gr_grin.gif" border="0">

Re: Results from SCD 10's N/A
 

Thanks guys.
And BTW, it is now official.
I am the first 346 ci N/A M6 LS1 to run 10's!!! <img src="gr_grin.gif" border="0">
Thanks Tony for checking into that and confirming it.

Gordon

Re: Results from SCD 10's N/A
 

Congrats Gordo on the new times and record !!

Re: Results from SCD 10's N/A
 

Hey Doofus, you are supposed to put "10s NA" somewhere in the thread title, I was here last night and overlooked that boring title hahaha.

Yes, Gordon is the FIRST 346ci 6-speed to run 10s NA. Judson got rid of the T56 when he was running mid-11s due to clutch issues. I'm also pretty sure he had the 375ci solid-roller under the hood when he went 10s the first time.

Jason 98 TA was the first 6-speed to run 10s NA, then Mickey (MIC5EY) was next. Jason99T/A would have been the first 346ci 10s, but sold his motor too soon <img src="gr_tounge.gif" border="0">

Congrats Gordon! After outspending us for 3 years now, the results have finally paid off! Welcome to the top of the heap bud! My new goal for the next project motor is to smack ALL of the other 6-speed NA cars down....and keep them down for a while (hehehehe). If the T56 busts, I have a fresh spare waiting. If that busts, we are moving to a TH350/brake

Tony

Tony

Re: Results from SCD 10's N/A
 

Gotta love those solid roller cams! I wonder what a solid roller setup would do in my car... <img src="gr_grin.gif" border="0">

Congrats Gordon!

Re: Results from SCD 10's N/A
 

HEHEHEHEHE.....
Yeah Tony I know, the title sucks. lol
Oh well. <img src="gr_tounge.gif" border="0"> I'll fix it.... <img src="gr_images/icons/wink.gif" border="0">

[ February 03, 2002: Message edited by: GTS SS ]</p>

Re: Results from SCD 10's N/A
 

Cooool

Congratulation with those times .... Solid has more in it .... keep it up <img src="gr_images/icons/wink.gif" border="0">

Good luck

Re: Results from SCD 10's N/A
 

[quote]
The first 346 ci N/A M6 LS1 to run 10's
<hr></blockquote>

I thought RaughHammer was the first to run 10's with a 346 CI N/A..

Am I mistaken ?? <img src="images/icons/confused.gif" border="0">


<img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />

Re: Results from SCD 10's N/A
 

GTS SS is the first M6.

Re: Results from SCD 10's N/A
 

Raughammer is an auto,

congradulations bro
JET <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />