dand35th

What would the smallest rear tires that will/would pull the front wheels off the ground? ET's 26-10.5-16??? givin the traction is good..

hondakiller

iTrader: (3)

ive got a pic in a mag of a 4.6 stang pulling the wheels at e-town on 275 bfg's. depends on track prep but id say those bfg's are probably the smallest you could go with. ive also seen my friend pull the wheels with 275 50 15 bfg's.

Stu

I pulled the front wheel with 255/50/16 BFG DR's.

It was only about 6 inches but it was up.

Stu

dand35th

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif"> It was only about 6 inches but it was up. </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thanks but we don't need to get into your personal problems <img border="0" title="" alt="[Embarrassed]" src="gr_emb.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Stu

Admit it tho....you were picturing it. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />

Stu

WeatherGuy

26*15*10 ET Drags will definitely do it, as I have just found out. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Onyx LS1

iTrader: (5)

lol Greg, I bet the 422 had nothing to do with that. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

WeatherGuy

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Onyx LS1:
<strong>lol Greg, I bet the 422 had nothing to do with that. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I was shocked at how well those tires were hooking - I was worried that they were going to be too little of tire, but guess that wasn't a concern. I may have to rethink tires soon as I will be upping the ante, whether spraying, blowing, or big stall with auto conversion. Haven't made up my mind yet.

98TAauto

iTrader: (2)

245/50/16 inch nittos and 1.58 60's pull a little wheelie. But car runs better with all 4 on ground <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

with skinnies up front also <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

11SECSS

iTrader: (199)

http://www.headsupreview.com/virginia/photos/jbuch.jpg

This was on 17" nittos

Slowhawk

iTrader: (12)

Dan,pulling wheels now <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I hope you got a cage in that convertable or you will only get one run <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />

dand35th

No, for the new secret weapon!! <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />

RoyO

I pulled both wheels off the ground with 26x11.5x15 ET Streets. 3k launch 1.72 60ft.

98TAauto

iTrader: (2)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 11SECSS:
<strong>http://www.headsupreview.com/virginia/photos/jbuch.jpg

This was on 17" nittos</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">freak <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

RAGENZ28

iTrader: (5)

26X11 HOOSIER WORKS GOOD