What kind of SFC's do you run?
 

I have some boxed BMRs, but I'm not crazy about the way that they hang down and they can be seen from the side. Is there anything comparable strength with no loss of ground clearance. Thanks, Shawn

Re: What kind of SFC's do you run?
 

I have Hotchkis weld-in SFC's and they fit really well. Only about 1/4" is exposed below the sheetmetal. If you get the black ones you'll barely see them. You can poke around the pics on my site, but I don't think you be able to see them.

There is no loss of ground clearance. I used to have the cross-braced SLP SFC's, so I know exactly what you're talking about. Those things hung way down, and I was scraping lots of stuff on my lowered car.

You'll have to knock your exhoust off to get to these SFC's. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Re: What kind of SFC's do you run?
 

I've got the BMR tubular weld in SFC's. Can't see them from the side, tightened the car up nicely, and I don't have one squeak or rattle in the car. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Bruce

Re: What kind of SFC's do you run?
 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Hardtop:
<strong> I've got the BMR tubular weld in SFC's. Can't see them from the side, tightened the car up nicely, and I don't have one squeak or rattle in the car. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Bruce </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Me too

Re: What kind of SFC's do you run?
 

I love my BMR Boxed. Yes they hang down but not an eysore by anymeans. They also protect my 3" x-pipe/exhaust setup. Awesome heavy duty product BMR.

Re: What kind of SFC's do you run?
 

hey redrum you wouldnt have such scraping problems if you took your foot off the gas every once in a while.

I run bmr tublar SFC's.

Re: What kind of SFC's do you run?
 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by rnr27band1:
<strong> I run bmr tublar SFC's. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Same here, Light weight and as strong as boxed.

Re: What kind of SFC's do you run?
 

i have the hotchkis weld ins as well. you cant see them at all, and really fit well. it stiffened the car up as well.