Hoping for deep 10's
 

I know many of you don't visit the nitrous forum, so here's some links that detail my current project:

www.cofba.org/users/reckless/dp_fuel.html

www.cofba.org/users/reckless/dp.html

<img src="http://www.cofba.org/users/reckless/nx22.jpg" alt=" - " />

Will stay with 150 shot for now on stock bottom end (with ARP rod bolts). Other mods are TEA Stage 2 heads and FMS F3 cam. Big challenge will be learning how to race with a 6-speed again <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Re: Hoping for deep 10's
 

That is one nasty looking set up,Good Luck with your driving classes,lol. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Re: Hoping for deep 10's
 

Hey Todd, will this make you the fastest person on LS1.com?

<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Sounds fun!

-Tony

Re: Hoping for deep 10's
 

I know I am the fastest moderator over there, for what that is worth <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Todd

Re: Hoping for deep 10's
 

Looks awesome! You planning on running at norwalk at all this year? It might be a good if race if spray a 200-225 shot <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />

Re: Hoping for deep 10's
 

Pretty sure I'll be at Norwalk on May 9th. We have the track reserved for our club from 10-4. Very nice track.

I may spray over 150 at the N vs. S shootout if it'll win me some cash <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Re: Hoping for deep 10's
 

Todd, that setup looks BAD ASS!!!!!

I wish I didn't have to see stuff like that, as it makes me want to put N2O on my car! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Re: Hoping for deep 10's
 

Thanks George....I say you should go for it <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Re: Hoping for deep 10's
 

I thought they came with 4 sol's. one per rail seems a little small?

also, how difficult would have been to route the hard lines with more of a 90' angle and fit the rails more over the intake?

and isnt the output of the n2o noid on the physical bottom of the noid?

<small>[ February 04, 2003, 12:02 PM: Message edited by: Ryan ]</small>

Re: Hoping for deep 10's
 

I think I see what you mean.

Have you seen Tom K's setup? SO sweet. here...

<img src="http://community.webshots.com/image2/4/44/77/47744477pNxxzN_ph.jpg" alt=" - " />

<small>[ February 04, 2003, 03:50 PM: Message edited by: Ryan ]</small>

Re: Hoping for deep 10's
 

The 80000efi kit comes with only two sol's. The 90000 kit comes with 4 sol's.

I thought about fitting the rails inside of the fuel rails, and it can prolly be dome without too much trouble. Shoot, I got so much tubing left over, I may try that later <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> The most difficult part of tube construction was the fact that the rails are perpendicular to the fuel rails, but the nozzles are at a slight angle. So a simple bend was not possible. It was a PITA for sure.

I actually thought about drilling and mounting the nozzles farther up in the runners to make things easy, but decided the system might hit too hard that way.

Todd

Re: Hoping for deep 10's
 

Ryan...you are correct about the noid output. I will have to change it. The side port is for a purge outlet.

Todd

<small>[ February 04, 2003, 12:16 PM: Message edited by: Reckless ]</small>

Re: Hoping for deep 10's
 

That's the first time I've seen that! That looks very nice. It should hit a lot harder with the nozzles that far up in the runners <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />

I dont' think there is any good way to do the setup for jet changes though <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> Although his does look easier than mine to change jets.

Todd