What PSI to run Nitto's ?
 

I am going to be getting the BMR torque arm and lower control arms with the relocation brackets. I'm also getting the 275/40 Nitto's to run. My question is what psi do you guys launch and at what RPM with an M6? Thanks for your help

Re: What PSI to run Nitto's ?
 

I use to keep mine between 18-22 psi. It depends on track preo and how hard you want to launch ..

Re: What PSI to run Nitto's ?
 

About 18-20 psi.

Re: What PSI to run Nitto's ?
 

Mine seem to hook best at 20psi. 1.66 60' lowered, SY3500, 3.73's, TR224, Spohn TA.

Re: What PSI to run Nitto's ?
 

18 PSI, nice hot burnout, 4.10 gears 3-3300 launch w/ my M6.

Re: What PSI to run Nitto's ?
 

Thanks for the help, Mine has been lowered and I will be ordering the panhard rod also to help. The best 60ft I could get before was a 2.0 with street tires and I lowered the tire pressure to 20psi and got that. So with the Nitto's and the suspension I should see alot better 60ft time. Thanks guys.

Re: What PSI to run Nitto's ?
 

I ran them at 18 when I was at the track to try and "hook", I've seen people go lower though... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Re: What PSI to run Nitto's ?
 

I lower my pressure to 18psi, With good burn out 4-6 seconds i cut 1.60s,and a1.586 Best.Nittos or BFGs. <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />

Re: What PSI to run Nitto's ?
 

i run 20 on my 315's and hook very good at the track and road.

Re: What PSI to run Nitto's ?
 

My best results were between 14 to 16 at the track. Come down in increments of one and find the air pressure that best helps you. Cheers.