TH350/3.23's track results!
#1
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
TH350/3.23's track results!
I finally took a few hours off work and dragged my Camaro out to Irwindale raceway. I didn't set any world records, but I was surprised how well the car ran considering. I'm now running a TH350 with 3.23 gears and the stock shifter. With a raceweight of 3300# (Spring break trim), I ran a 6.75@102.8 and 6.73 @102.7 (going through the traps in 2nd gear). I didn't really push the car off the line, but managed a 1.52 60' time with the 3.23s. 1st gear feels like it lasts FOREVER! I kinda like it. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I'm going to stick with the 3.23s for now, so my only main change before spring break will be adding a 3.5" catback, and maybe a new set of tires.
PS. My motor is still for sale. <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" />
I'm going to stick with the 3.23s for now, so my only main change before spring break will be adding a 3.5" catback, and maybe a new set of tires.
PS. My motor is still for sale. <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" />
#2
Re: TH350/3.23's track results!
Congrats <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
How is the car on the highway?
Did you launch off the transbrake? How firm are the shifts?
Cheers,
Chris
How is the car on the highway?
Did you launch off the transbrake? How firm are the shifts?
Cheers,
Chris
#3
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: TH350/3.23's track results!
I don't have a trans brake, but on the highway the RPMS are the same as the 4L60E/4.10 combo. It shifts nice and firm. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#5
Re: TH350/3.23's track results!
What no transbrake?!!
How can you do a proper test hehe <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
What do you think you would sixty foot off the brake?
Cheers,
Chris
How can you do a proper test hehe <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
What do you think you would sixty foot off the brake?
Cheers,
Chris
#7
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: TH350/3.23's track results!
Pat: Some PCM issue. MMS loaded an M6 program in and did a little tuning, and it took care of it. I still need to go back for more tuning though.
Chris: I didn't buy a transbrake because I wanted an automatic valve body. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> I don't believe it would 60' much better with one. I do think I'll be able to sneak in to the 1.4s in this trim though. Hopefully good enough for 10.40s.
Chris: I didn't buy a transbrake because I wanted an automatic valve body. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> I don't believe it would 60' much better with one. I do think I'll be able to sneak in to the 1.4s in this trim though. Hopefully good enough for 10.40s.
Trending Topics
#8
10 Second Club
iTrader: (4)
Re: TH350/3.23's track results!
If I come I'll only smack u and then I'll have a law suit on my hands <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I think Brent,Marc,Dave,Stealth,Scott are going to the race Terry.
U never know though I might show up.
But I'm probably wussing out....
Its a shame that "Cough 396 Cough" just went in,I wouldve loved to see u duplicate those 10.80's w/the 346.One things for sure,You AINT dumb <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
JS
<small>[ February 21, 2003, 01:07 PM: Message edited by: JS ]</small>
I think Brent,Marc,Dave,Stealth,Scott are going to the race Terry.
U never know though I might show up.
But I'm probably wussing out....
Its a shame that "Cough 396 Cough" just went in,I wouldve loved to see u duplicate those 10.80's w/the 346.One things for sure,You AINT dumb <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
JS
<small>[ February 21, 2003, 01:07 PM: Message edited by: JS ]</small>
#9
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: TH350/3.23's track results!
Heh as soon as someone buys my 396 maybe I'll throw another stock shortblock in and show you guys what a real heads/cam setup can do. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#12
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: TH350/3.23's track results!
Hey JS are you coming out to the Spring Shootout? I'm looking forward to racing some Cartek cars. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />