SJM Manufacturing Inc

iTrader: (5)

This afternoon after completion of mocking up what was necessary for the prototype RT 15" rims for our LS1/LT1's, we now have a working direct setup for our cars!

This series was a bit different as it contains components from the p2 series thus I had to be sure we would be able to utilize this setup on our cars before it was publically available as a direct fit rim. Strength-wise, it has the same properties of our P1 rim.

The rims can be seen on my site listed in the "P1" section.

Email me if you have any questions or comments.

Steve

Orange Krush

So Steve these will be in the 15x10 size for the rear, as a direct bolt-on, no grinding required? <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

How about a 16x10? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

<small>[ March 08, 2003, 05:39 PM: Message edited by: Orange Krush ]</small>

WJ SOM SS

iTrader: (11)

Steve: What is the backspace diminsion of this 15" wheel? Thanks. WJ. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Fenris Ulf

So tempting <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

SJM Manufacturing Inc

iTrader: (5)

Direct bolt-in no grinding should be needed with these. 16's are a no brainer fitment wise.

B/S 7.25-7.5 depending on if its an LT1 or LS1. For the LS1's they will end up sitting 1/16 inch deeper (inside the fender area)then how most run the welds.

GeorgeC

Those RT wheels are awesome looking! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Slow Z28

iTrader: (19)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by GeorgeC:
<strong> Those RT wheels are awesome looking! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I SECOND THAT!!!!!!

Nine Ball

iTrader: (38)

Those are the drag wheels I was planning on purchasing for the Formula. I may end up getting the 17" versions for the 69 though <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Tony

jerflash

so any one of those rims pictured on the page i can get to fit my 2002
thats sweet
now the problem of what will look the best

SJM Manufacturing Inc

iTrader: (5)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by jerflash:
<strong> so any one of those rims pictured on the page i can get to fit my 2002
thats sweet
now the problem of what will look the best </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Anything in the "P1" section or the "Road-Race" sections are setup to be a direct fitment for LT1 and LS1 cars.

Mike C

Those rt wheels look awesome will be looking forward to picking up a set. What would be the weight on those 7lbs for the front runners and 12 for the rears for 15" wheels. Does that sound about right.

MikeC

SJM Manufacturing Inc

iTrader: (5)

Those weights are close (fronts are approx 9 lbs) due to the bolts that are added which addes extra weight.

The welded non riveted style (not shown on either bogarts site or mine yet but will be shortly :-)) are alittle lighter.

Steve

Brady

iTrader: (3)

Those RT's are bad to the bone. Shoot me a price Steve, my other wheel-deal didn't pan out. (their design sucked).