325.50.15 MT DR Peepz... Some Q's
#1
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
325.50.15 MT DR Peepz... Some Q's
If you are running 325.50.15 MT DR's...
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
#2
TECH Veteran
iTrader: (10)
Originally Posted by Pro Stock John
If you are running 325.50.15 MT DR's...
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
#4
10 Second Club
iTrader: (18)
If they hook, the radial design will make the car faster as opposed to if the exact same tire was not a radial. There are no belts in the sidewall, only in the tread. And that keeps the tread from deforming under speed = your car will MPH better on the top end. Weight isnt the issue.
#6
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
If you are running 325.50.15 MT DR's...
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
1) They are 12 or 13 inches wide on say a Bogart rim?
2) After 5 passes are they pretty bald?
3) Is your car lowered?
1) 13" sidewall to sidewall on a 10" rim
2) no
3) Yes, with some massaging on the inside of the wheel wells and thats it. Outter lip is rolled nicely.
Trending Topics
#12
TECH Veteran
iTrader: (10)
Originally Posted by Pro Stock John
Used DR's from a buddy of mine, just might try them out since I can get them for dirt.
V6Bird, you 15x10/7.5? No spacers? Any pics?
V6Bird, you 15x10/7.5? No spacers? Any pics?
#14
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
I just want to know if I can fit 325-50-15 mt dr's on the car without cutting the inner sheetmetal out.
I will be on 15x10/7.5 welds or 15x9.75 bogarts, i will have a set of each now for the back.
I will be on 15x10/7.5 welds or 15x9.75 bogarts, i will have a set of each now for the back.
#15
9 Second Club
They are actually holding up better than I thought they would. I've got 19 passess on them and about 850 miles.
They've been very stable on a heavy car down to 14.5psi so far with 1.55-1.67 60's in street trim. It's just a walk down the track to the top end with no cha cha going on.
Rick
They've been very stable on a heavy car down to 14.5psi so far with 1.55-1.67 60's in street trim. It's just a walk down the track to the top end with no cha cha going on.
Rick
#17
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
Used DR's from a buddy of mine, just might try them out since I can get them for dirt.
V6Bird, you 15x10/7.5? No spacers? Any pics?
V6Bird, you 15x10/7.5? No spacers? Any pics?
#18
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ATVracr
No cutting except for the bump stop and I run a spacer. 15x10 with 7.5 bs
I have about 10 passes and a few hundred miles and they still look great.
My best 60' so far is 1.47
pretty sure we can get it in the 1.3's with these tires
I have about 10 passes and a few hundred miles and they still look great.
My best 60' so far is 1.47
pretty sure we can get it in the 1.3's with these tires